Dry Production Areas - Concrete Flooring | Sika

For more information on Sika and our products, or to discuss a current or forthcoming project with an Area Manager please visit our contact page.

file

Metallic Dry Shakes

Sikafloor® dry shakes are applied as dry powders, directly onto the surface of the freshly laid concrete. The concrete slab is then powerfloat finished in the normal way. The Sikafloor® dry shake is specially formulated to utilise excess moisture from the concrete slab. As a result of the finishing process the dry
shake becomes monolithic with the concrete slab providing a surface with a very low water cement ratio. This creates an integrated extremely hard wearing floor. Concrete surface hardeners, plus curing and surface sealing compounds complete the Sikafloor® range.

file

Non Metallic Dry Shakes

Sika Ltd have a full range of non metallic dry shake systems suitable for all cementitious flooring applications. Sikafloor® dry shakes are applied as dry powders, directly onto the surface of the freshly laid concrete. The concrete slab is then powerfloat finished in the normal way. The Sikafloor® dry shake is specially formulated to utilise excess moisture from the concrete slab. As a result of the finishing process the dry
shake becomes monolithic with the concrete slab providing a surface with a very low water cement ratio. This creates an integrated extremely hard wearing floor. Concrete surface hardeners, plus curing and surface sealing compounds complete the Sikafloor® range.

file

Fibre Suppressant Dry Shakes

Fibre suppressant are topping for monolithic fibre reinforced concrete floors. When sprinkled and trowelled into fresh wet concrete floors, which have either steel or polypropylene fibres incorporated within the mix, it forms a wear resistant, smooth surface, providing a reduction in exposed fibres and improved aesthetics.

file

Curing Agents

Sika Ltd have developed a full range of Curing Agents suitable for use with new laid concrete floors and Sika Flooring systems.