Use

Bonds all types of construction materials such:

• Timber, brick, steel, iron, glass and stoneware
• Damp-proof membrane
• Bonding bridge
• Bearing pads to concrete
• Crack injection 5 - 10 mm.

Characteristics and Advantages

• Colour coded components to ensure correct mixing
• Excellent adhesion even in damp conditions
• Unaffected by moisture Workable at low temperatures
• Solvent free Damp-proof membrane beneath SikaTop 77 or SikaCem 810 screed

Colour

Grey (mixed) Base - white
Hardener - black

Packaging

Use

Bonding of strengthening plates to:

• Concrete
  
• Timber
• Masonry substrates

Characteristics and Advantages

• Solvent freeColour coded components to ensure correct mixing
• Excellent adhesion to correctly prepared substrates even when damp
• Controlled open time and strength gain by choice of appropriate grade
• Good stress transfer between the structural member and externally bonded reinforcement
• Excellent water resistant properties providing outstanding resistance to creep
• Comprehensively proven in field applications. Full compliance with Department of Transport requirements

Colour

Base - White
Hardener - Black
Mixed - Mid Grey

Use

Bonds all types of construction materials including concrete, brick, plaster, stone, ceramics, polyester, epoxy, glass, steel, iron, aluminium and timber:

• Levelling and pointing
• Blowhole / pore hole filling
• Crack and surface sealer

Characteristics and Advantages

• Easy to use (can be used in standard sealant guns)
• Thixotropic for overhead and vertical applications
• Economic - use only as much as required
• Excellent adhesion
• Can be used on damp concrete
• Resistant to water, chemicals, solvents and oils

Colour

Grey

Packaging

250ml Cartridge (12 per box) - 3133002

Use

As a structural adhesive and mortar for:

• Concrete elements
• Hard natural stone
  
• Ceramics, fibre cement
  
• Mortar, Bricks, Masonry Steel, Iron, Aluminium Wood Polyester, Epoxy Glass 

As a repair mortar and adhesive:

• Corners and edges
• Holes and void filling
• Vertical and overhead use
• Joint and crack arris / edge repair

Characteristics and Advantages

• Suitable for dry and damp concrete surfaces
• Very good adhesion to most construction materials
• High strength adhesive
• Thixotropic: non-sag in vertical and overhead applications
• Solvent free, hardens without shrinkage
• No primer needed

Colour

Part A: white
Part B: dark grey
Parts A+B mixed: concrete grey

Packaging

6 kg (A+B) Pre-batched unit, pallets of 480 kg (80 x 6 kg)
1.2 kg (A+B) Pre-batched unit, box of 6 x 1.2 kg.