What are grouts and fixings used for on bridges?
Remedial works on concrete bridge structures often include the requirement for void filling, fixing and sealing or bedding and grouting with free flowing materials. Typical examples are concrete repairs using formwork, high precision grouting under bridge bearing plates, or for cable duct grouting. Additionally flowable resin and cement grouts are used to fix manholes or other steel frames and equipment, where rapid hardening materials are usually required to reduce closure times.
Sika in Grouting and Fixings
Sika provides a wide range of tested and well proven grouts and fixing materials based on all of the different technologies available including cement, epoxy, polyurethane and PMMA. For many decades, Sika has also provided special products for high precision applications such as bearing plates, rail base plates and duct sealing.
Structural Grouts for Bridges
Materials for grouting under bridge bearing plates and to fill voids, holes and cavities or for embedding drainage pipes andother elements.
Cement Based, High Precision Grouting Products
SikaGrout® 212 is a one part flowable shrinkage compensated cementitious grout. Meets the requirements of Class R4 of BS EN 1504-3 & BS EN 1504-6
Sika® Armorex® L2 High Flow
Sika® Armorex® L2 High Flow is a one part, high flow, rapid strength cementitious grout. Meets the requirements of BS EN 1504-6
SikaGrout® 111 GP
SikaGrout® 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout.
SikaGrout® 212 - PDS | SDS
Epoxy resin based, rapid hardening, high strength grouting
Used under dynamic loading
Sikadur® 42 HE
Sikadur®-42 HE is a three-component, high performance, high precision, moisture tolerant, epoxy grouting system. For use at temperatures between +5°C and +30ºC.
Sikadur® 42 HE - PDS