Grouting mortars are free-flowing, high strength cement or synthetic resin-based mortars, used for the filling of voids under machines and other structural elements as well as for the grouting of anchors. Sika can provide all technologies of grouting materials for specific applications on site.

Cementitious Grouts

  • Structural grouts
  • Shrinkage compensated

Resin Grouts & Resin Anchoring Systems

  • Moisture tolerant
  • Use in high temperatures
  • High strength chemical injection anchoring adhesive

Cementitious Grouts

Our range of cementitious grouts

Sika® L2 High Flow

Sika® Armorex® L2 High Flow is a one part, high flow, rapid strength cementitious grout. Meets the requirements of BS EN 1504-6

Uses

  • For precision, high performance, grouting underneath machine bases, structural steelwork, etc
  • For grouting precast concrete units and anchor bars
  • Repairing concrete structures
  • Filling voids
  • For grouting thicknesses between 10-00mm
  • Steel reinforcement anchoring

 

Characteristics and Advantages

  • High strength
  • Shrinkage compensated
  • High flowability retention
  • Durable
  • Non metallic
  • Impressive track record
  • Quality assured factory blend
  • Chloride free
  • >40 N/mm2 in 24 hours

 

DOWNLOADS

Product Data Sheet | Safety Data Sheet

SikaGrout® 212

SikaGrout® 212 is a one part flowable shrinkage compensated cementitious grout. Meets the requirements of Class R4 of BS EN 1504-3 & BS EN 1504-6

Uses

  • General purpose grouting
  • Under stanchion plates
  • Filling cavities, voids, gaps and recesses
  • Concrete repairs
  • Machine & base plates
  • For exterior and interior use
  • Steel reinforcement anchoring

 

Characteristics and Advantages

  • Excellent flow properties
  • Pre batched for quality
  • Just add water
  • Compatible with Sika® FerroGard® corrosion inhibitors
  • High compressive strength gain
  • Easy to mix and apply
  • Contains no chloride admixtures
  • Overcoatable with Sika reprofiling/levelling mortars and coatings
  • Low shrinkage
  • Generally more durable than equivalent class of concrete
  • Does not segregate or bleed
  • Fire rating and protection properties comparable to concrete
  • Can be pumped or poured
  • Good mechanical properties
  • Grouting thickness between 10-75mm

 

DOWNLOADS

Product Data Sheet | Safety Data Sheet

SikaGrout® 3200

SikaGrout® 3200 is a fast hardening, high early strength, high final strength, 1-component, shrinkage compensated, free flowing cementitious grout for structural filling of joints and under grouting base plates.

Uses

  • High performance precision grouting of vertical or horizontal joints for onshore steel and pre-cast concrete wind towers

 

Characteristics and Advantages

  • Fatigue tested and certified 
  • Fast early strength development 
  • High final strength 
  • Fluid consistency 
  • Can be pumped 
  • Expansion compensated 
  • Application thickness 10 to 150mm
  • High adhesion to concrete
  • CE Certification

 

DOWNLOADS

Product Data Sheet | Safety Data Sheet

SikaGrout® 111 GP

SikaGrout® 111 GP is a one part flowable shrinkage compensated general purpose cementitious grout.  

Uses

  • General purpose grouting 
  • Under stanchion plates 
  • Filling cavities, voids, gaps and recesses 
  • Sealing around penetrations 
  • Machine & base plates 
  • Post fixings For exterior and interior use 

 

Characteristics and Advantages

  • Easy to use (ready to mix powder) 
  • Pre batched for quality
  • Just add water 
  • High compressive strength gain 
  • Easy to mix and apply 
  • Contains no chloride admixtures 
  • Shrinkage compensated 
  • Fire rating and protection properties comparable to concrete
  • Can be pumped or poured 
  • Good mechanical properties  

 

DOWNLOADS

Product Data Sheet | Safety Data Sheet

Resin Grouts & Anchoring Systems

Our range of resin grouts and anchoring systems.

Sikadur® 42 HE

Sikadur® 42 HE is a three-component, high performance, high precision, moisture tolerant, epoxy grouting system. For use at temperatures between +5°C and +30ºC.

Uses

High-strength grouting and fixing of:

  • Starter bars 
  • Anchors
  • Fasteners 
  • Tie rods 
  • Crash barrier posts 
  • Fence and railing posts

 

Under-grouting and bedding of:

  • Precision seating of base plates 
  • Machine bases, seat base-plates for light and heavy machinery including heavy impact and vibratory machinery, reciprocating engines, compressors, pumps, presses, etc. 
  • Bridge bearings 
  • Mechanical joints (i.e. road/bridge/deck types etc.)

 

Sleeper-less, direct rail fixing:

  • Crane tracks 
  • Light rail and permanent way in tunnels 
  • Light rail and permanent way over bridges

 

DOWNLOADS

Product Data Sheet

Safety Data Sheet (Part A) | Safety Data Sheet (Part B)

Sika® AnchorFix® 1

Solvent- and styrene free based two part polyester anchoring adhesive.

Uses

As a fast curing anchoring adhesive for all grades of: 

  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems 
  • Concrete 
  • Hollow and solid masonry

 

Prior to any application, the suitability of the Sika AnchorFix® Adhesive for the substrate in terms of the desired bond strength, and for the prevention of surface staining or discolouration, must be confirmed by testing in a sample area. This is due to the wide variation of possible substrates, particularly in terms of strength, composition and porosity: 

  • Hard natural stone 
  • Solid rock

 

Characteristics and Advantages

  • Fast curing 
  • Standard guns can be used 
  • Can be used at low temperatures 
  • High load capacity 
  • ETA Approval available 
  • Non-sag, even overhead 
  • Styrene-free 
  • Low odour 
  • Low wastage

 

DOWNLOADS

Product Data Sheet

Safety Data Sheet (Part A) | Safety Data Sheet (Part B)

Sikadur® 33

Thixotropic two part structural adhesive based on epoxy resin in a cartridge.

Uses

As a structural adhesive for:

  • Concrete elements 
  • Hard natural stone 
  • Ceramics and fibre cement
  • Mortar, bricks, blocks, masonry and render etc. 
  • Steel, iron ald aluminium 
  • Wood
  • Polyester and epoxy

 

For concrete repairs- interior, vertical and overhead repair of: 

  • Corners and edges 
  • Hole and void filling 
  • Joint arrises

 

Joint filling and crack sealing: 

  • Crack filling and sealing (non-moving)

 

Metalwork, carpentry: 

  • Fixing and fastening of handrails, railings, balustrades and supports
  • Fixing of window and door frames

 

For use in the following: 

  • Concrete 
  • Hard natural stone 
  • Solid rock 
  • Hollow and solid masonry 
  • Steel 
  • Wood

 

Characteristics and Advantages

  • Can be used on damp concrete 
  • Excellent adhesion to the substrate
  • Non-sag, also overhead 
  • High load capacity
  • Shrinkage-free hardening 
  • Styrene-free

 

DOWNLOADS

Product Data Sheet

Safety Data Sheet (Part A) | Safety Data Sheet (Part B)

Speak to an expert

To speak to an expert about our grouting and fixing solutions, please use the contact form below and one of our team will get back to you as soon as possible.