2 Coat Systems: Standard

Products Finish
2 coats of Sikagard®-403 W @ 3.6m2/litre per coat Matt
2 coats of Sikagard®-405 W @ 6m2/litre per coat Mid-sheen
2 coats of Sikagard®-406 W @ 6m2/litre per coat Matt
2 coats of Sikagard®-207 W @ 10m2/litre per coat Mid-sheen

3 Coat Systems: Standard

Products Finish
1 coat of Sikagard®-403 W @ 3.6m2/litre per coat Choice of 2 top coats from the Standard Range as
above.

Reinforced Systems

Products Finish
1 coat of Sikagard®-403 W @ 4m2/litre per coat, Sika® Reemat Lite, 1 coat of Sikagard®-403 W @ 4m2/litre per coat Choice of 2 top coats from the Standard Range as
above

Double Reinforced Systems

Products Finish
1 coat of Sikagard®- 403 W @ 2m2/litre per coat, Sika® Reemat Premium then Sika® Reemat Lite embedded with 1 coat of Sikagard®-403 W @ 0.1m2/litre per coat (wet on wet) Choice of 2 top coats from the Standard Range as above

Project Related Requirements

Walls and ceilings have to fulfil the highest hygiene and increasingly very specific requirements for the prevention of contamination, particularly in the nuclear, pharmaceutical, cosmetic, food, beverage, chemical and electronics industries.

Coatings in the food and beverage industry have to be suitable for direct contact, or to be in close proximity of food stuffs, without adversely affecting them, in addition to being able to withstand intensive cleaning regimes and frequent exposure to chemical detergents.

Easy wall cleaning and ease of maintenance procedures provide the basis for an efficient production environment.

Speak to an expert

To contact us about our hygienic wall coatings, please complete the short form below and a member of our team will get back to you as soon as possible.