Sikafloor® PurCem® HS-26 Gloss
Sikafloor® PurCem® HS-26 Gloss is an industrial flooring system based on polyurethane cement hybrid technology and is part of the Sikafloor® PurCem® Gloss system range.
Sikafloor® PurCem® HS-26 Gloss consists of a primer or scratch coat layer and an extremely durable, gloss, scratch resistant and seamless polyurethane hybrid wearing course.
Sikafloor® PurCem® HS-26 Gloss withstands chemical attack, abrasion and impacts. Due its gloss, scratch resistant and impervious surface the flooring is easy to clean, maintain and hygienic.
- High mechanical resistance
- Good chemical resistance
- Glossy and scratch resistance surface
- Extremely low dirt pick up
- Easy clean and maintain
- Seamless
- Non-tainting, odourless during application
- VOC free and environmental friendly
- Tolerant to moisture in the substrate
- Very good life cycle cost performance
Usage
- Food and beverage industry
- Workshops
- Storage rooms
- Hangars
- Parking decks
- Kitchens
- Basements
- Laboratories
- Back of house areas
Advantages
- High mechanical resistance
- Good chemical resistance
- Glossy and scratch resistance surface
- Extremely low dirt pick up
- Easy clean and maintain
- Seamless
- Non-tainting, odourless during application
- VOC free and environmental friendly
- Tolerant to moisture in the substrate
- Very good life cycle cost performance
Packaging
Please refer to the individual Product Data Sheets
Colour
Beige, Dusty Grey, Grass Green, Maize Yellow, Night Blue, Oxide Red, Pebble Grey, Tele Grey 2
Appearance
Smooth, gloss finish
System Details
ENVIRONMENTAL INFORMATION
- Conforms to AgBB (2012) for use in indoor environment. Test report No. 392-2014-00156701C. Eurofins Product Testing.
APPROVALS / STANDARDS
- Declaration of CE conformity according to requirements of EN 13813:2002, Declaration of Performance and provided with the CE marking
- Certificate of Compliance to be used safely as a floor coating in food sector. Short term contact of the coating with the foodstuff is safe as far as any hygienic regulations are not violated. Report No. 39438U15. ISEGA Forschungs- und Untersuchungs-Gesellschaft mbH.
- Taint potential, Report No. S/REP/134217/2 Campden BRI (Chipping Campden) Ltd.
- Clean Room Suitable Material (Riboflavin test). Test report SI 1501-752, Sikafloor® -260 PurCem®. Fraunhofer Institute for Manufacturing and Engineering and Automation IPA.
- Fire classification report according to EN 13501-1:2007 + A1:2010. Test report No. 15/9284-338 Parte 1. Applus LGAI.
System Structure
Sikafloor® PurCem® HS-26 Gloss
| Layer | Product | Consumption |
| 1. Scratch coat | Sikafloor®-21 PurCem® or Sikafloor®-210 PurCem® or Sikafloor®-260 PurCem® | ~1–2 kg/m2 |
| 2. Wear coat | Sikafloor®-260 PurCem® | ~1.8 kg/m2/mm |
Consumptions are theoretical and do not include any wastage, additional material need due to porosity, substrate profile etc.
As an optional build up the primers Sikafloor®-155 W/-150/-151 + quartz sand 0.3–0.8 mm fully blinded broadcast, followed by the Sikafloor®-260 PurCem® (scratch coat) can be used. Please refer to the individual Product Data Sheet.
Composition
Water-based polyurethane cement hybrid
Nominal Thickness
~2–3 mm
Volatile organic compound (VOC) content
Very low content of Volatile Organic Compounds. It fulfils the stringent demands for indoor air quality and low VOC emitting products AFFSET, M1 Gold, AgBB, EMICODE and A+.
Shelf Life
Please refer to the individual Product Data Sheets
Storage Conditions
Please refer to the individual Product Data Sheets
Shore D Hardness
~80 | (ASTM D 2240) |
Resistance to Wearing
AR0.5 | (EN 13892-4) |
Resistance to Impact
Class II (>10 N/mm2) | (ISO 6272) |
Tensile Adhesion Strength
> 2.0 N/mm2 | (EN 1542) |
Reaction to Fire
Bfl-s1 | (EN 13501-1) |
Chemical Resistance
Please refer to Sikafloor® PurCem® Gloss chemical resistance guide. Contact Sika technical service for specific information.
Thermal Resistance
| Thickness | Thermal Resistance |
| ~2 mm | -5 °C to +60 °C |
| ~3 mm | -10 °C to +60 °C |
Permeability to Water Vapour
Class II | (EN 1504-2) |
Capillary Absorption
| < 0.01 kg/(m2h0.5) | (EN 1062-3) |
Application
Product Temperature
+10 °C min / +35 °C max
Ambient Air Temperature
+10 °C min / +35 °C max
Relative Air Humidity
80 % max
Dew Point
Beware of condensation!
The substrate and uncured floor must be at least 3 °C above dew point toreduce the risk of condensation or other disturbance of the surface on the floor finish.
Substrate Temperature
+10 °C min / +35 °C max
Substrate Moisture Content
Sikafloor® PurCem® HS-26 Gloss can be installed on substrates with higher moisture content. The substrate needs to be visibly dry and have an adequate pull-off strength min 1.5 N/mm2. No ponding water. Check for rising moisture.
Applied Product Ready for Use
| Temperature | Foot traffic | Light traffic | Full cure |
| +10 °C | ~40 hours | ~48 hours | ~7 days |
| +20 °C | ~22 hours | ~26 hours | ~3 days |
| +30 °C | ~18 hours | ~22 hours | ~2 days |
Note: Times are approximate and will be affected by changing ambient and substrate conditions
CLEANING
Please refer to the Sikafloor® Cleaning Regime.