Product Data Sheet Safety Data Sheet Show all documents

Everbuild Tecnic® Silicone HM 60

Premium, Low Modulus Silicone Sealant.

Everbuild Tecnic® Silicone HM 60 is a premium, acetoxy curing silicone sealant that contains a powerful anti fungal compound to prevent mould and fungal growth in areas of high humidity. Specifically designed for use in bathrooms, kitchens and other sanitary areas. Typically used for sealing to non-porous substrates.

  • High viscosity formula for quick easy tooling .
  • Flexible - movement accommodation of +/- 25%.
  • Waterproof seal.
  • Contains a powerful anti fungal compound to prevent mould growth to the sealant.
  Application Temperature +5oC to + 40oC Service Temperature -40oC to + 150oC Tensile Modulus  0.35 MPa at 100% elongation (ISO8339) Specific Resistances Mild acids/alkalis at <10% concentration Bleach and anti-bacterial cleaners Coverage Joint Size 5x5 5x10 10x15 10x20 Lin Mtrs per 310mm 12.4 6.2 2.0 1.56
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Sealing around all kitchen and bathroom sanitary areas.
  • Expansion joint and corner sealing of ceramic tiles.
  • Sealing around sanitary fittings in domestic and municipal applications.
  • General sealing in areas subject to high humidity levels.

Advantages

  • High viscosity formula for quick easy tooling .
  • Flexible - movement accommodation of +/- 25%.
  • Waterproof seal.
  • Contains a powerful anti fungal compound to prevent mould growth to the sealant.
  Application Temperature +5oC to + 40oC Service Temperature -40oC to + 150oC Tensile Modulus  0.35 MPa at 100% elongation (ISO8339) Specific Resistances Mild acids/alkalis at <10% concentration Bleach and anti-bacterial cleaners Coverage Joint Size 5x5 5x10 10x15 10x20 Lin Mtrs per 310mm 12.4 6.2 2.0 1.56

Packaging

310ml Cartridge

Colour

White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Conforms to ISO 11600 F/G 25 LM.
  • CE marked under EN15651 parts 1, 2, 3 façade, glazing and sanitary also cold climate.
Product Information

Shelf Life

Use within 24 months.

Storage Conditions

Store in cool dry conditions between + 5˚C and 25˚C.

 
Technical Information

Tensile Strength

0.6 N/mm² (ISO8339)

Movement Capability

+/-25%

Joint Design

Joint dimensions - For maximum movement accommodation, it is recommended that:
1. The sealant joint depth should be no less than 5mm
2. Joint depth should be 5mm for joints up to 10mm wide
3. Joints above 10mm in width should be half the width in depth up to 20mm and minimum 10mm for wider joints
Joint depth may be adjusted to the correct size using EVERBUILD JOINT BACKER ROD or BOND BREAKING TAPE in cases where there is not enough depth to use Backer Rod.

Joint widths are calculated as in BS6213:
Width = (M x 100) / F + M
Where M = movement and F = movement accommodation Factor.

Application

Application Information

Curing Time

3-4mm per day

Skin Time

15 minutes at 20˚C
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust fee. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion. Porous surfaces may require priming - a small area should be tested first.

Primer

Everbuild Tecnic® Silicone HM 60 does not require a primer on most common surfaces, although adhesion tests are recommended prior to full scale application. If the joint is likely to be immersed or if adhesion is poor (especially on porous surfaces) use EVERBUILD SILICONE PRIMER P1. To improve adhesion (if required) to non-porous surfaces, prime with EVERBUILD SILICONE PRIMER NP2.

Documents