Sika manufactures and develops a range of quality, seamless flooring and screed solutions for both industrial and commercial applications. 

Sika has a range of self-levelling compounds and screeds that are the perfect substrate for all the popular types of floor finish. The quality of a substrate can make all the difference between a smooth flooring system application and a troublesome one, a positive flooring experience and disappointment.

Sika’s cementitious products meet or exceed all the latest standards and requirements for both new and refurbishment work. They provide customers with peace of mind for a high quality and reliable substrate for all floor coverings.

There are many reasons why you may need a good quality self-levelling compound - it could be as simple as the floor is uneven, or you may need to install underfloor heating, or just need a strong smooth finish to apply the final floor finish onto.

Whatever the reason, Sika’s range of high quality and easy to apply products can help you do any one of these.

708 Febflor - Self Level Floor Compound
708 Febflor

Self Level Floor Compound

708 Febflor self level floor compound is a cement-based product, used to level out uneven floors and screeds, prior to overlaying. The compound provides a free-flowing mix that sets in two hours, and can be overlaid after only eight hours, at normal temperatures.

N.B. This product is not suitable for use as a final wearing surface.

 

Used for: levelling uneven subfloors, internally and externally, prior to laying ceramic
tiles, thermoplastic tiles, lino, wood block flooring, or carpet.

 

PDS | SDS 

 

710 Febflor - Flexible Self-levelling Compound
710 Febflor

Flexible Self-levelling Compound

710 Febflor is a cementitious floor levelling and smoothing compound in powder form(with added latex powder), requiring only the addition of water. 710 Febflor can easily
be spread onto suitably prepared stable substrates, in order to smooth surfaces, prior to laying final floor coverings. This product is not designed as a final wearing course to receive traffic, and must be covered with tiles, lino, carpet, etc.

 

Used for: levelling and smoothing concrete and screeded floors, prior to laying final wearing coverings such as carpets, sheet vinyl, tiles, etc., where heavier trafficking is anticipated, or increased flexibility is required.

 

PDS | SDS 

SikaLevel®30 Latex Ultra - High Strength, Rapid Setting, Floor Levelling Compound
SikaLevel®30 Latex Ultra

High Strength, Rapid Setting, Floor Levelling Compound

SikaLevel®-30 Latex Ultra is a high performance, latex-modified cement-based selflevelling compound, for floor smoothing, and levelling uneven rigid internal floors. With a rapid setting time of two hours, the latex modification ensures improved flexibility and resilience, and can withstand vehicular traffic.


Used for: levelling the following: wooden flooring; floating floors; floors with underfloor heating; sand/cement screeds (not anhydrite); concrete slabs and pre-cast elements; existing ceramic and rigid plastic tiles. It is also suitable for some exterior applications such as sheltered balconies and walkways, prior to laying ceramic tiles, slabs and natural stone.

 

PDS | SDS 

Febflor Heatflex - Self-levelling Compound for use with Underfloor Heating
Febflor Heatflex

Self-levelling Compound for use with Underfloor Heating

Febflor Heatflex is a fibre and polymer- reinforced, flexible, ultra-high strength cementbased self-levelling compound, designed specifically for use with underfloor heating and for application over wooden floors. This product is also suitable for application over existing concrete and screeding, brick, stone, unglazed ceramic tiles, plastic sheet DPC, and epoxy membranes. It is foot trafficable within three hours, and can be tiled after approximately four hours.


Used for
: as a levelling compound for existing wooden and concrete floors, where underfloor heating is present.

 

PDS | SDS 

Sikafloor®-100 Level - Self-levelling Compound
Sikafloor®-100 Level

Self-levelling Compound

Sikafloor®-100 Level is a very low emission cement-based self-levelling compound, suitable for interior areas. Sikafloor®-100 Level is characterised by good working properties, featuring low tension. This compound can be grinded or pumped, and is waterproof against dispersion adhesives. It is suitable for castor chair rollers according
to EN 12 529.


Used for: smoothing and levelling of the suitable substrates, before applying textile and elastic floor coverings, in interior areas

 

PDS | SDS 

Sikafloor®-300 Rapid Level - Rapid Setting Self-levelling Compound
Sikafloor®-300 Rapid Level

Rapid Setting Self-levelling Compound

Sikafloor®-300 Rapid Level is a very low emission cement-based self-levelling compound, for almost all substrates suitable for laying. For interior use only, this pumpable compound features a high level of hardness and strength, with low porosity surface. Sikafloor®-300 Rapid Level has a very low shrinkage and is very rapid curing.

 

Used for: filling, smoothing and levelling of suitable substrates, before applying parquet, ceramic tiles, textile and elastic floor coverings, as well as coatings that are loaded with fork-lift traffic. Use suitable Sika Primer, according to absorbency and condition of subfloor.

 

PDS | SDS 

Sikafloor® Level-30 - High Performance Self-levelling Compound
Sikafloor® Level-30

High Performance Self-levelling Compound

Sikafloor® Level-30 is a polymer modified, self-levelling, fast drying cementitious screed, for higher thickness requirements for both interior and/or exterior floors. Sikafloor® Level-30 is useable as a screed for industrial service conditions, when sealed with a PU or EP resin top coat, from medium to high load.

 

Used for: a floor self-levelling screed, to level or smooth screeds and concrete floors at a thickness between 4–30mm, in one working step. Also suitable for filling, smoothing and levelling suitable substrates, before applying parquet, ceramic tiles, seamless resin floors, textile and elastic floor coverings. This product is useable as screed for exterior areas, when sealed with a covering, e.g. a coating.

 

PDS | SDS 

Sikafloor®-200 Level - Self-levelling Compound
Sikafloor®-200 Level

Self-levelling Compound

Sikafloor®-200 Level is a very low emission cement-based self-levelling compound, suitable for interior and exterior areas. This product is a waterproof, frost resistant, rapid hardening compound, with low tension, that can be pumped. Sikafloor®-200 Level is recognised for its extremely low shrinkage.


Used for: filling, smoothing and levelling of suitable substrates, before applying parquet, ceramic tiles, textile and elastic floor coverings. Use suitable Sika Primer, according to absorbency and condition of substrate.

 

PDS | SDS 

SikaSet®-45 - Fast Setting Ironwork Bedding Mortar and Fast-Set Floor Repairs
SikaSet®-45

Fast Setting Ironwork Bedding Mortar and Fast-Set Floor Repairs

SikaSet®-45 is a one-component magnesia phosphate- based, rapid hardening and high early strength concrete repair and ironwork bedding mortar, for use in temperatures as low as 0°C. This product provides a good un-primed adhesion, is trafficable within one hour, and can be overcoated.

 

Used for: a rapid repair mortar for horizontal concrete surfaces; filling mortar for voids and honeycombed areas in concrete, and bedding mortar for inspection chambers, manhole covers, gully grates, stanchion posts, street furniture. Additionally, this product can be used on industrial floors, roads, runways, bridge decks, car park decks, and furniture.

 

PDS | SDS 

Sika® Rapid Repair Mortar - R4 Fast Setting Repair Mortar
Sika® Rapid Repair Mortar

R4 Fast Setting Repair Mortar

Sika® Rapid Repair Mortar is a one-component fast-setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3. A high strength product that is non-corrosive to steel, and can be overcoated.

 

Used for: repairing all types of structures, for both horizontal, vertical, and hand applied repairs. It is designed for internal and external use, in place of R1, R2 & R3 motars.

 

PDS | SDS 

SikaScreed® HardTop-60 - High Strength, Rapid Hardening, Floor Levelling Mortar
SikaScreed® HardTop-60

High Strength, Rapid Hardening, Floor Levelling Mortar

SikaScreed® HardTop-60 is a soft plastic consistency, polymer modified, horizontal levelling mortar, designed for application with a minimum layer thickness of 8mm. This mortar is a fast curing, rapid load-bearing and over-coatable product that is almost shrinkage-free during hardening and curing. Additionally, this product has a very high abrasion resistance and compressive strength, and can be laid as Monolithic floor finish, or on a slope.

 

Used for: minor and major repairs to heavily stressed, industrial concrete flooring with full usability after 24 hours.

 

PDS | SDS 

Contact Us

For all enquiries relating to Sika's roofing range, please use the contact form below and one of our team will get back to you shortly.