Put water in its place with our unrivalled range of waterproofing products and systems.

 

With more than 100 years of experience in structural waterproofing, Sika is the reliable partner for all of the parties involved on every project. Sika is committed to providing proven and economic watertight solutions for even the most challenging requirements.

 

We consider the entire waterproofing process to the very last detail and can provide solutions for both new build and refurbishment projects. We have a wide range of systems for both keeping water in and keeping water out.

 

Click here to download the Waterproofing Essentials brochure  

Sika® Igolflex®-201 - Bitumen emulsion fibre reinforced coating
Sika® Igolflex®-201

Bitumen emulsion fibre reinforced coating

Sika® Igolflex®-201 is a two-part, solvent-free and fibre reinforced coating, based on a polymer-modified bitumen emulsion. Part one contains the liquid polymer modified bitumen emulsion, with the fibre reinforcement. Part two contains the reactive component for accelerated curing.

 

Used for: Waterproofing of all types of below ground concrete structures as a thick layer coating to protect against percolating water, waterproofing of wet room floors and balconies under cementitious screeds, acts as an adhesive to bond lightweight thermal insulation boards.

 

PDS | SDS

Sika® Igolflex® P-01 - Bitumen emulsion primer
Sika® Igolflex® P-01

Bitumen emulsion primer

Sika® Igolflex® P-01 is a one-part, solvent-free bitumen emulsion primer for thick layer bituminous coatings and membranes.


Used for: Surface consolidation of concrete, mortar and brick substrates, improving the adhesion of solvent-free bituminous coatings and membranes.

 

PDS | SDS 

Sikalastic®-1K - Flexible fibre reinforced mortar
Sikalastic®-1K

Flexible fibre reinforced mortar

Sikalastic®-1K is a one component, flexible, fibre reinforced mortar, based on cement modified with special alkali-resistant polymers. It also contains fine fillers, selected graded aggregates, plus special waterproofing additives to produce a flexible mortar that is ideal for waterproofing surfaces subject to flexural strain.


Used for: Protection of concrete surfaces according to BS EN 1504-9, general waterproofing of concrete surfaces and structures including tanks, basins and pipes, internal waterproofing of walls and floors, flexible protection coating for reinforced concrete structures against the effects of de-icing salts, freeze-thaw and carbon dioxide.

 

PDS | SDS 

Sika® Damp-proofing Slurry - Cementitious waterproof coating
Sika® Damp-proofing Slurry

Cementitious waterproof coating

Sika® Damp-proofing Slurry is a one part polymer modified cement-based waterproof coating comprising of special cement based components and admixtures. When mixed with water, a slurry or mortar material is produced for direct application to a variety of construction substrates.


Used for
: Waterproof coating for tanking residential/domestic basements, thin layer mortar or slurry coating/lining, waterproofing/damp-proofing of interior and exterior structures, lining of water tanks, pools, planters etc.

 

PDS | SDS  

SikaTop® Seal-107 Standard - Cementitious waterproof mortar slurry
SikaTop® Seal-107 Standard

Cementitious waterproof mortar slurry

SikaTop® Seal-107 Standard is a two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures.


Used for: Interior and exterior waterproofing and damp-proofing, protection of concrete structures against effects of de-icing salts and freeze-thawing, rigid waterproofing of basement walls, pore/blowhole filling, waterproofing of drinking water reservoirs, levelling mortar for concrete repair works.

 

PDS | SDS 

Sika® Drain-850 Geo - Protection board with drainage
Sika® Drain-850 Geo

Protection board with drainage


Sika® Drain-850 Geo is a heavy duty drainage and protection sheet produced from high density polyethylene (HDPE) with dimples 10mm high and a filtration layer of geotextile (PP) bonded on the top.


Used for: Protection and drainage for preformed sheet membrane waterproofing systems, liquid applied membranes and with the Sika White Box concept for waterproofing retaining walls and heavy duty roofs/podiums.

 

PDS  

SikaMur® InjectoCream-100 - Water repellent cream
SikaMur® InjectoCream-100

Water repellent cream


SikaMur® InjectoCream-100 is a new water repellent cream used for the control of rising damp. It is inserted into a series of holes drilled into a mortar course of the masonry by means of a simple application gun – no special injection pump required. Once injected, SikaMur® will diffuse within the damp wall to form a water repellent barrier and block future rising damp.


Used for: Treating rising damp in almost all types of masonry walls – solid brick, cavity, random form stone and rubble infill walls, etc.

 

PDS | SDS

Sika® BituSeal S-115 - Bitumen sheet waterproofing
Sika® BituSeal S-115

Bitumen sheet waterproofing


Sika® BituSeal S-115 is a post-applied self-adhesive waterproofing sheet membrane. It is based on SBS (styrene-butadiene-styrene) modified bitumen, reinforced with polyester non-woven fabric. It has a silicone-treated release liner on the upper and lower surface.

 

Used for: Waterproofing and damp-proofing of foundations.

 

PDS | SDS 

Sika® BituSeal Primer - Bitumen primer
Sika® BituSeal Primer

Bitumen primer

Sika® BituSeal Primer is a bitumen solution to be used in conjunction with Sika® BituSeal S-115.


Used for: Increasing adhesion and bond to the substrate.

 

PDS | SDS

Contact Us

For all enquiries relating to Sika's waterproofing range, please use the contact form below and one of our team will get back to you shortly.