Sika manufactures and develops a range of quality, concrete repair, protection and refurbishment solutions for both industrial and commercial applications.

 

Many years of research and development plus decades of practical experience has enabled Sika to provide systems to restore and rehabilitate concrete structures that have deteriorated due to corrosion, structural damage, water infiltration, freeze/thaw, seismic activity, reactive aggregates, and others.

 

Sika is able to provide you with special admixtures for site batch mortars, prebagged repair mortars and a wide range of concrete protective solutions.

Sika® MonoTop®-610 - Cementitious Steel Reinforcement Primer and Bonding Bridge
Sika® MonoTop®-610

Cementitious Steel Reinforcement Primer and Bonding Bridge

Sika® MonoTop® -610 is a one component cementitious, polymer modified primer for reinforcement protection, and also a bonding bridge for MonoTop concrete repair mortars.

 

Used: to bond MonoTop concrete repair mortars to existing cementitious or steel substrates and provide additional corrosion protection to reinforcement in MonoTop concrete repair mortars especially in areas of low concrete cover and in the presence of chlorides.

 

PDS | SDS 

Sika® MonoTop®-612 - Wet Spray Repair Microconcrete
Sika® MonoTop®-612

Wet Spray Repair Microconcrete

Sika® MonoTop-612 is a cement-based, one component low permeability repair microconcrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3.

 

Used: for repairing all types of structures including horizontal, vertical and overhead repairs; hand applied repairs; spray applied repairs; for exterior and interior use; in place of R1, R2 & R3 mortars.

 

PDS | SDS 

Sika® MonoTop®-615 - R3 Cementitious High Build Concrete Repair Mortar
Sika® MonoTop®-615

R3 Cementitious High Build Concrete Repair Mortar

Sika® MonoTop-612 is a cement-based, one component low permeability repair microconcrete, containing silica fume and polymer, meeting the requirements of Class R4 of BS EN 1504-3.

 

Used: for repairing all types of structures including horizontal, vertical and overhead repairs; hand applied repairs; spray applied repairs; for exterior and interior use; in place of R1, R2 & R3 mortars.

 

PDS | SDS 

Sika® MonoTop®-620 - Cementitious Smoothing Coat/Levelling Mortar and Pore Sealer
Sika® MonoTop®-620

Cementitious Smoothing Coat/Levelling Mortar and Pore Sealer

Sika® MonoTop®-620 is a 1-component cementitious polymer modified mortar, for
exterior and interior use.


Used: as a concrete pore sealer/levelling mortar/smoothing coat, repairing minor
defects, as a thin layer render, repairing pores and honeycombed concrete.

 

PDS | SDS 

Sika® MonoTop®-115GP - Cementitious General Purpose Concrete Repair Mortar
Sika® MonoTop®-115GP

Cementitious General Purpose Concrete Repair Mortar

Sika® MonoTop®-115GP is a one component cement based polymer modified general purpose repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN 1504-3.

 

Used: for repairing all types of structures not exposed to water submersion including overhead and vertical repairs; hand applied repairs; spray applied repairs; for exterior and interior use; in place of R1 and R2 mortars.

 

PDS | SDS 

Sika® MonoTop®-614F - R4 Flowable Cementitious Repair Mortar
Sika® MonoTop®-614F

R4 Flowable Cementitious Repair Mortar

Sika® MonoTop®-614F is a cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3.

 

Used: in horizontal or vertical repairs; bridges; marine structures; tunnels; buildings; Fire damaged structures; for exterior and interior use; in place of R1, R2 and R3 mortars.

 

PDS | SDS 

Sika® Rapid Repair Mortar - R4 Fast Setting Cementitious Repair Mortar
Sika® Rapid Repair Mortar

R4 Fast Setting Cementitious Repair Mortar

Sika® Rapid Repair Mortar is a one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3.

 

Used: for repairing all types of structures including overhead and vertical repairs; hand applied repairs; floor slabs and car park decks; for exterior and interior use; in place of R1, R2 and R3 mortars.

 

PDS | SDS 

SikaSet®-45 - Low Temperature, Rapid Hardening Repair/Bedding Mortar
SikaSet®-45

Low Temperature, Rapid Hardening Repair/Bedding Mortar

SikaSet®-45 is a one component magnesia phosphate based, rapid hardening and high early strength concrete repair and ironwork bedding mortar for use in temperatures as low as 0˚C.

 

Used: for horizontal concrete surfaces; industrial floors, roads, runways, bridge decks and car park decks; filling mortar for voids and honeycombed areas in concrete; bedding mortar for inspection chambers, manhole covers, gully grates, stanchion posts and street furniture.

 

PDS | SDS 

Sikagard®-552W  - Water Based Primer For Coating
Sikagard®-552W

Water Based Primer For Coating

Sikagard®-552 W Aquaprimer is a one-component, water dispersed, adhesion promoting primer for water dispersed polymer paint coatings, which is part of a system.

 

Used: for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and thin rendering such as Sika® MonoTop®-620 etc. It can also be used as a primer on firmly adhering existing water based coatings, or under cement resurfacing mortar to improve the adhesion in case of concrete surface treated with hydrophobic impregnation.

 

PDS | SDS 

Sikagard®-675W - Protective Coating for Concrete
Sikagard®-675W

Protective Coating for Concrete

Sikagard®-675 W GB ElastoColor is a one-part, plastoelastic-water dispersed coating based on styrene acrylate dispersion for the protection and enhancement of fair-faced concrete.

 

Used: for protection and enhancement of concrete structures; concrete repair works on Sika levelling mortar, fibre cement and overcoating existing soundly adhering coatings. Suitable for protection against ingress, moisture control and increasing the resistivity.

 

PDS | SDS 

Sikagard®-550W - Crack Bridging Protective Coating for Concrete
Sikagard®-550W

Crack Bridging Protective Coating for Concrete

Sikagard®-550 W Elastic is a one component, plasto-elastic coating based on UV-curing acrylic dispersion with excellent crack-bridging properties even at temperatures below 0˚C.

 

Used: for protection and enhancement of concrete structures, especially exposed outdoor concrete surfaces with a risk of cracking. It is also used with concrete repair works as an elastic protective coating on Sika® smoothing mortar, fibre cement and overcoating of existing soundly adhering coatings.

 

PDS | SDS 

Sikadur®-52 Injection Type N - Low Viscosity Injection Resin
Sikadur®-52 Injection Type N

Low Viscosity Injection Resin

Sikadur®-52 Injection Type N is a two part, solvent-free, low viscosity injection liquid, based on high strength epoxy resin, with a high adhesion to concrete, mortar, stone, steel and wood.

 

Used: to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings, e.g. columns, beams, foundations, walls, floors and water retaining structures. It not only forms an effective barrier against water infiltration and corrosion promoting media, but it also structurally bonds the concrete sections together.

 

PDS | SDS 

Sikadur®-31 EF - Thixotropic Multi-purpose Epoxy Adhesive
Sikadur®-31 EF

Thixotropic Multi-purpose Epoxy Adhesive

Sikadur®-31 EF is a moisture tolerant, thixotropic, structural 2-component multipurpose adhesive, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10˚C and +30˚C.

 

Used: as a structural adhesive for concrete elements, ceramics, steel and wood. Also used as a repair material and adhesive for corners, edges and void fillings, aswell as joint and crack sealant and repair.

 

PDS | SDS 

Sikadur®-33 - Structural Epoxy Adhesive
Sikadur®-33

Structural Epoxy Adhesive

Sikadur 33 is a two component, solvent free, cold cure, thixotropic epoxy resin structural adhesive and repair mortar. It is supplied in a cartridge with an in-line mixer tip and is designed for application using a geared sealant gun. 

 

Used: on damp concreteExcellent adhesion to the substrateHigh load capacityShrinkage-free hardening Styrene-free

 

PDS | SDS 

Sika® AnchorFix®-1 - Fast Curing Anchoring Adhesive
Sika® AnchorFix®-1

Fast Curing Anchoring Adhesive

Sika® AnchorFix®-1 is a single cartridge, two component, mix-in-the-nozzle, fast curing,solvent and styrene free, methacrylate based chemical anchoring adhesive for standard applications with low to medium loads.

 

Used: as a fast curing anchoring adhesive for all grades of reinforcing steel,concrete, hard natural stone and rock, threaded rods and hollow and solid masonry.

 

PDS | SDS 

SikaGrout®-111GP - Cementitious General Purpose Grout
SikaGrout®-111GP

Cementitious General Purpose Grout

SikaGrout®-111 GP is a one part flowable shrinkage compensated general purpose cementitious grout.High compressive strength gainShrinkage compensatedCan be pumped or poured.

 

Used: for exterior and interior grouting, filling cavities, vloids and gaps, sealing around penetrations and post fixings.

 

PDS | SDS 

Sika® L2 High Flow - High Flow Rapid Strength Grout
Sika® L2 High Flow

High Flow Rapid Strength Grout

Sika® L2 High Flow is a one part, high flow, rapid strength cementitious grout, for precision, high performance, grouting underneath machine bases, structural steelwork, etc.

 

Used: For precision, high performance, grouting underneath achine bases and structural steelwork, filling voids and repairing concrete structures.

 

PDS | SDS 

SikaGrout®-3200 - High Performance Cementitious Grout for Onshore Wind Tower
SikaGrout®-3200

High Performance Cementitious Grout for Onshore Wind Tower

InstallationsSikaGrout®-3200 is a fast hardening, high early strength, high final strength, 1-component, shrinkage compensated, freeflowing cementitious grout for structural filling of joints and under grouting base plates. 

 

Used: for High performance precision grouting of vertical or horizontal joints for onshore steel and pre-cast concrete wind towers

 

PDS | SDS 

Contact Us

For all enquiries relating to Sika's refurbishment range, please use the contact form below and one of our team will get back to you shortly.