In order to increase energy output, turbine rotor blades can be modified by attaching performance parts. One such modification is to attach a winglet at the tip end of the rotor blade which decreases the drag on the blade, increases the power coefficient of a wind turbine and reduces the noise emitted by the blades. Winglets are either attached to the rotor blade during the manufacturing process or retrofitted on existing generators on-site.

Sikaforce® 7812 L7 MR

PRODUCT DESCRIPTION

SikaForce®-7812 L7 MR is the base part of a two component polyurethane adhesive used with hardener SikaForce®-7010.

AREAS OF APPLICATION

SikaForce®-7812 L7 MR is designed for various applications, e.g. the filling of pin holes and scratches ensuring a smooth finish of wind turbine blades.

DOWNLOADS

Product Data Sheet | Safety Data Sheet

SikaForce® 7818 L7

PRODUCT DESCRIPTION

High performance non-sagging structural adhesive for wind turbine bonding applications.

AREAS OF APPLICATION

SikaForce®-7818 L7 is used for various bonding applications in the wind turbine manufacturing process, e.g. the attachment of mounting parts, lightning protection etc.

DOWNLOADS

Product Data Sheet | Safety Data Sheet

Speak to an expert

To speak to an expert about our Retrofitted Winglet solutions, please fill in the short form below and a member of our team will get back to you as soon as possible.

Please provide a post code so your enquiry can be sent to the most relevant person.