There is a product in the Sika MonoTop® range for any concrete repair project. Please check out the range of Sika MonoTop® Mortars for all your general purpose repair projects below:

Sika MonoTop®-115 GP

Cementitious General Purpose Concrete Repair Mortar

Sika® MonoTop®-115 GP is a 1-component cement based polymer modified general
purpose repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN
1504-3.

Used: for repairing all types of structures not exposed to water submersion, including
overhead and vertical repairs; hand applied repairs; spray applied repairs; for exterior
and interior use; in place of R1 and R2 mortars.

  • Pre-bagged for quality
  • High build
  • Low wastage
  • Just add water to amount required
  • Contains no chloride admixtures
Sika® MonoTop®-610

Cementitious Steel Reinforcement Primer and Bonding Bridge


Sika® MonoTop®-610 is a 1-component cementitious, polymer modified primer for
reinforcement protection, and also a bonding bridge for MonoTop concrete repair mortars.


Used: for bonding MonoTop® concrete repair mortars to existing cementitious or steel
substrates and providing additional corrosion protection to reinforcement in MonoTop
concrete repair mortars, especially in areas of low concrete cover and in the presence of
chlorides.

  • Only requires mixing with water
  • Adjustable consistency
  • Active corrosion inhibitors for added protection
  • Sprayable by wet spray method
  • Suitable for drinking water contact
Sika® MonoTop®-612

Wet Spray Repair Microconcrete

Sika® MonoTop®-612 is a cement-based, 1-component low permeability repair microconcrete, containing silica fume and polymer, meeting the requirements of ClassR4 of BS EN 1504-3.

Used: for repairing all types of structures, including horizontal, vertical and overheadrepairs; hand applied repairs; spray applied repairs; for exterior and interior use; in placeof R1, R2 & R3 mortars.

  • Compatible with Sika® FerroGard® corrosion inhibitors
  • Low shrinkage with adjustable consistency
  • Suitable for drinking water contact
  • Easy to mix and apply
  • Pre-bagged for quality, just add water
Sika® MonoTop®-614F

R4 Flowable Cementitious Repair Mortar

Sika® MonoTop®-614F is a cement based, 1-component flowable repair mortar (HighFlow), containing shrinkage compensators and high range water-reducing agents,meeting the requirements of Class R4 of BS EN 1504-3.

Used: for horizontal or vertical repairs; bridges; marine structures; tunnels; buildings;fire damaged structures; for exterior and interior use; in place of R1, R2 and R3 mortars.

  • One component, ready to use with low shrinkage
  • Repair depths upto 150 mm in one application
  • Can be poured or pumped
  • Overcoatable with Sika reprofiling/levelling mortars and coatings
  • High mechanical and good flow properties
Sika® MonoTop®-615

R3 Cementitious High Build Concrete Repair Mortar

Sika® MonoTop®-615 is a 1-component cement based polymer modified high build repair and reprofiling mortar, meeting the requirements of Class R3 of BS EN1504-3.

Used: for repairing all types of structures, including overhead and vertical repairs; hand applied repairs; spray applied repairs; for exterior and interior use; in place of R1 and R2 mortars.

  • Sprayable by wet spray method
  • High build
  • Low wastage
Sika® MonoTop®-620

Cementitious Smoothing Coat/Levelling Mortar and Pore Sealer

Sika® MonoTop®-620 is a 1-component cementitious polymer modified mortar, for exterior and interior use.

Used: as a concrete pore sealer/levelling mortar/smoothing coat, repairing minor defects, as a thin layer render, repairing pores and honeycombed concrete.

  • Pre-bagged for quality
  • Just add water
  • Compatible with Sika® FerroGard® corrosion inhibitors
  • Compatible with SikaTop® and MonoTop® mortars
  • Overcoatable with Sikagard® coatings
  • Sprayable by wet spray method
Sika® MonoTop®-630 Rapid

R4 Fast Setting Cementitious Repair Mortar

Sika® MonoTop®-630 Rapid is a 1-component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3.

Used: for repairing all types of structures, including overhead and vertical repairs; hand applied repairs; floor slabs and car park decks; for exterior and interior use; in place of R1, R2 and R3 mortars.

  • Pre-bagged for quality, just add water
  • High early strength with rapid setting
  • Non corrosive to steel
  • Can be overcoated
  • Contains no chloride admixtures

Share your Sika® MonoTop® Projects