Glass wall grouting

In total vision glazing (TVG, fin glazing) and glass balustrades,the glass panes are fixed to the sub-frame minimising the stress on the glass by the use of an adhesive. With SikaGlaze® the bottom glass edge is embedded inthe floor rebate and therefore results in uniform stress distribution. Protect against weathering by using Sika’s compatible Sikasil® WS silicone sealants. Furthermore, they permanently transfer the forces to the support structure. Sika’s range of high-modulus SG silicone adhesive sealants offer amazing properties for this purpose.

Sika Solutions for Facades

SikaGlaze® GG-735

Self levelling PU 'grout' for:

  • Total vision glazing (TVG fin glazing)
  • Glass balustrades
  • Easy removal of glass if subsequent repair needed

Characteristics and advantages

  • Non streaking on glass and metal
  • Full compatibility with PVB laminated glass
  • Very easy to install
  • High Shore D hardness
  • Solvent free
  • Long open time


Product Information

Chemical Base

Polyols, filled (A), Isocyanate derivatives (B), 2-part

Pot Life/Curing Time Before Transportation

35 minutes / 12 hours @ 20˚C

Application Temperature/Service Temperature

+15˚C to +30˚C / -30˚C to +80˚C

Shore D Hardness

80 D approx.



Product Data Sheet

Safety Data Sheet (Part A) | Safety Data Sheet (Part B)

Contact Us About Balustrade Adhesives

To contact us about any of our Balustrade Adhesive products and systems, please fill in the short form below and one of our team will get back to you as soon as possible.

Please provide a post code so your enquiry can be sent to the most relevant person.