Sika have a range of activators and primers, back rod and applicator guns. We understand that with any specialist sealant and adhesive application, the preparation of the joint is just as important, if not more so, than the correct application of the sealant itself.

Sika® Primer-3N

Primer suitable for slightly damp or dry, porous, absorbent materials and metals.

Brush applied.

Uses: Dry, porous, absorbent materialsand metals.

Sika® Everbuild Tecnic Sealant Primer P1

Primer suitable for use on porous surfaces prior to applying all common types of silicone, polyurethane and hybrid sealants.

Brush applied.

Uses: Brick, stone, concrete, blockwork, floor screeds, render

Sika® everbuild tecnic sealant primer np2

Primer suitable for non porous surfaces prior to applying all common types of silicone, polyurethane and hybrid sealants.

Brush applied.

Uses: Glass, PVCu, aluminium, steel, ceramics.

Sika® Aktivator-205

A bond activating pre-treatment suitable for non porous surfaces prior to applying all common types of silicone, polyurethane and hybrid sealants.

Apply with clean lint free paper towel.

Uses: Metals, plastics, glazed ceramics and painted surfaces.

Sika® Everbuild Backer Rod

A non absorbent, compressible grey closed cell polyethylene (P.E) foam backup material.

Uses:

  • For reducing the depth of joints in construction / glazing
  • Creating a backstop to allow proper sealant tooling

contact us

For all enquiries relating to Sika's primer and ancillary ranges, please use the contact form below and one of our team will get back to you shortly.