pre-treatment for optimum adhesion

Thorough cleaning of surfaces is essential for reliable bonding of the certain Sika adhesives and sealants. Therefore, Sika supplies special products with optimised adhesion to a wide variety of materials. Sika’s technical facilities will carry out thorough tests on the project materials to determine the best primer to use. Based on our experience and test results, Sika will make specific product recommendations for each individual project.

Sika offers a wide range of ancillary products for preparing substrates and processing sealants. These auxiliaries integrate into the whole façade product system and are carefully matched to Sikasil®, Sikaflex®, SikaHyflex® and SikaTack® ranges. They will round off all your façade projects.

Sika® Aktivator-205

Pre-treatment agent for non porous substrates

 

Application

To clean and activate the following non-porous substrates:

  • Metals
  • Plastics
  • Glazed ceramics
  • Painted surfaces
Sika® Aktivator

Bonding activator

 

Application

  • For surfaces prior to sealing and bonding with Sikasil® and Sikaflex® products
Sika® Remover-208

Solvent based cleaning agent

 

Application

  • For surface preparation and removal of uncured adhesives and sealants
Sika® Cleaner P

Solvent based, low viscosity cleaning agent for non porous substrates

 

Application

  • Can be used to remove contaminants such as grease, oil, dust and dirt from surfaces
Sika® Primer-3N

Primer suitable for slightly damp or dry, porous, absorbent materials and metals

 

Application

  • Dry, porous, absorbent materials
Sika® Primer-215

Primer suitable for priming various plastics, timber and other porous materials prior to
bonding

 

Application

  •  For plastics, varnishes, lacquer and porous absorbent materials Preferred for joints aroun windows where a variety of materials are encountered
Sika® Primer-210

A low viscosity liquid primer used to improve the adhesion of Sika adhesives and sealants

 

Application

  • For metals i.e. aluminium and galvanised steel, plastic and paint-primed substrates. For porous and non-porous substrates

contact us

For all enquiries relating to Sika's pre-treatments and primers, please use the contact form below and one of our team will get back to you shortly.