Product Data Sheet Show all documents
EVERBUILD® GUN A NAIL®

EVERBUILD® GUN A NAIL®

EVERBUILD® GUN A NAIL® IS A GAP FILLING, HIGH STRENGTH, QUICK GRAB ADHESIVE.

EVERBUILD® GUN A NAIL® is a high strength, gap filling multi-purpose building adhesive based on a tackified solvent free system for use in a wide variety of building and home improvement applications. EVERBUILD® GUN A NAIL® can be used where at least one of the substrates to be bonded is porous.

  • Solvent free - environmentally friendly formulation.
  • Excellent adhesion/bond strength - adheres to most common surfaces.
  • Exceptional early grab properties - suitable for both vertical and horizontal positions.
  • High solids formulation - excellent gap filling properties without shrinkage.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Bonding dado rails, architrave and skirting.
  • Fixing wall cladding direct to internal wall surfaces or timber battens.
  • Fixing battens directly onto walls without fastenings.
  • Bonding carpet gripper systems to most floors without the need for nails or tacks.
  • Bonding stair nosing to concrete or wooden stairs.
  • Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.
 

Advantages

  • Solvent free - environmentally friendly formulation.
  • Excellent adhesion/bond strength - adheres to most common surfaces.
  • Exceptional early grab properties - suitable for both vertical and horizontal positions.
  • High solids formulation - excellent gap filling properties without shrinkage.
  • Extended open time - allows for easy repositioning after fixing.
  • Will adhere to damp surfaces.
  • Water clean up - no hazardous solvents.

Packaging

290 ml Cartridge

Colour

White

Product Details

Product Information

Chemical Base

Water based acrylic polymer

Shelf Life

24 months from date of manufacture.

Storage Conditions

Store in original unopened containers between +5 and +25 °C

Density

1.50 – 1.60 g/cm3

Solid content by mass

75 - 80 %
Technical Information

Lap Shear Strength

Bond Strength (Beech/beech) Lap Shear (4 days)

1.7 – 1.8 N/mm²

Service Temperature

-10 to +70 °C

Application

Application Information

Open Time

Max 10 mins at +23 °C and 50 % R.H

Curing Rate

24 -48 hours depending on substrates
Application steps

APPLICATION INSTRUCTIONS

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Wood, plaster and brick may be damp but not running wet. Use mechanical abrasion to clean porous surfaces if necessary before application.

Documents