Product Data Sheet Show all documents
EVERBUILD® FINE SURFACE FILLER

EVERBUILD® FINE SURFACE FILLER

A ready mixed filler for filling small holes and surface imperfections

EVERBUILD® FINE SURFACE FILLER is an easy to use ready mixed filler for filling small holes and surface imperfections in most porous surfaces such as plaster and wood. Dries to a very smooth finish that can be painted or papered.

  • Interior or exterior use
  • Ready mixed formula – apply straight from tub
  • Overpaintable with most solvent based and emulsion paints
  • Overstainable
Movement AccommodationLow – Dries hardMaximum Fill4mm depth in one coatMaximum Width25mmApplication Temperature5°C to 30°C.pH8.5-9.9
Product Data Sheet Show all documents

Usage

Minor indoor or outdoor repairs to plaster, plasterboard, brick, render, wood, stone and most other building materials.  

Advantages

  • Interior or exterior use
  • Ready mixed formula – apply straight from tub
  • Overpaintable with most solvent based and emulsion paints
  • Overstainable
Movement AccommodationLow – Dries hardMaximum Fill4mm depth in one coatMaximum Width25mmApplication Temperature5°C to 30°C.pH8.5-9.9

Packaging

600g Plastic Tub

Colour

White / Off White Paste

Product Details

Product Information

Shelf Life

24 months from date of manufacture when stored according to manufacturers instructions.

Storage Conditions

Store at 5°C - 25°C. Protect from frost.

Density

1.9 g/cm3 (approx)

Solid Content

85 -90% w/w

Application

Application Information

Drying time

30mins - 4 hours depending on depth and temperature
Application steps

APPLICATION

Stir well before use and apply direct from tub. Press the filler into the repair with a spreader or knife up to a maximum depth of 4mm. Once dry, sand to a smooth finish. When used outdoors, seal the repair with an oil based paint once dry.

 

CLEANING OF TOOLS

All tools should be cleaned immediately after use with warm water.

Documents