Product Data Sheet Show all documents
EVERBUILD® 204 Evermix 3 in 1

EVERBUILD® 204 Evermix 3 in 1

triple action air entraining chloride free admixture.

EVERBUILD® 204 Evermix 3 in 1 triple action admixture waterproofs, plasticises and retards to assist workability, reduce water penetration and allow larger areas to be covered in one application. EVERBUILD® 204 Evermix 3 in 1 is particularly formulated for use in renders, dry dash and pebble-dashing, however it can also be used in any cement mixture where waterproofing and increased workability are required in conjunction with retarded setting.

  • The combination of an air entrainer and retarder allows larger areas to be covered in one application
  • Improves workability/trowelability.
  • Significantly reduces water penetration.
  • Chloride free (chloride ion content < 0.1%).
  • Reduces bleeding/segregation.
  • Improves durability
  • Inhibits efflorescence.
  • Reduces shrinkage (cracking and crazing reduced).              
  • Enhances insulation properties.
Chloride Ion Content < 0.1% w/w (nil) Typical Reduction In Water Absorption Control:      15% absorption With 3 in 1: 5% absorption (375ml 3 in 1 per 50Kg cement vs control, 4:1 sand: cement, 20%)
Product Data Sheet Show all documents

Usage

As an admixture for exterior/interior cementicious render finishes such as roughcast, harling and dashing. May also be used internally after installation of a DPC system.  

Advantages

  • The combination of an air entrainer and retarder allows larger areas to be covered in one application
  • Improves workability/trowelability.
  • Significantly reduces water penetration.
  • Chloride free (chloride ion content < 0.1%).
  • Reduces bleeding/segregation.
  • Improves durability
  • Inhibits efflorescence.
  • Reduces shrinkage (cracking and crazing reduced).              
  • Enhances insulation properties.
Chloride Ion Content < 0.1% w/w (nil) Typical Reduction In Water Absorption Control:      15% absorption With 3 in 1: 5% absorption (375ml 3 in 1 per 50Kg cement vs control, 4:1 sand: cement, 20%)

Packaging

5ltr & 25ltr Jerry

Colour

Soft Mobile Gel.

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Conforms with the air entraining requirements of EN934-3 “Specification for air entraining (plasticizing) mortars” at an addition rate of 250ml to 500ml of 3 in 1 per 50kg cement.
Product Information

Shelf Life

2 years when stored according to manufacturers instructions.

Storage Conditions

Store at moderate temperatures. PROTECT FORM FROST.

Density

approx. 1.02 g/cm3 at 20°C

pH-Value

10.7 – 12.7

Application

Consumption

Recommended Dosage

250ml to 500ml per 50Kg cement, or 20/40 parts water to 1 part 3 in 1

Documents