Product Data Sheet Show all documents

EVERBUILD® Quick Mac Cold Joint Sealer

Bitumen cold joint sealer and tack coat

EVERBUILD® Quick Mac Cold Joint Sealer is a high specification tarmacadam repair compound designed to seal and waterproof vertical joints, that can also be used as a tack coat before applying tarmac. EVERBUILD® Quick Mac Cold Joint Sealer will also improve the bond strength to existing macadam, ironwork and concrete, thus prolonging repair life.

  • Clean and efficient
  • Ready-to-use cold-lay product – just fill and compact down
  • Prevents water ingress instantly
  • Instantly trafficable
  • Will not displace – stays where it is put
Product Data Sheet Show all documents

Usage

  • To seal and waterproof reinstatement vertical edges.
  • As a tack coat before the application of macadam.
  • Repairing tarmac roads, driveways etc.
  • Repairing tarmac footpaths.
  • Remedial work around ironworks i.e. drains, manhole covers etc.
 

Advantages

  • Clean and efficient
  • Ready-to-use cold-lay product – just fill and compact down
  • Prevents water ingress instantly
  • Instantly trafficable
  • Will not displace – stays where it is put

Packaging

750ml aerosol

Colour

Black

Product Details

Product Information

Shelf Life

12 months from the date of manufacture in the original unopened packaging

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C. Storage outside these parameters will significantly reduce shelf life.

Application

Application steps

APPLICATION

High traffic public areas: (carriageways, footpaths, cycle tracks, tennis courts etc)

For maximum durability a 60mm wearing course is recommended. Apply EVERBUILD® Quick Mac Cold Joint Sealer into recess and rake to a depth of 45mm (ie 50% greater than compacted depth). Compact to 30mm in accordance with Appendix 8 of the Re-Instatement of Openings in Highways 1992. Re-seal vertical surfaces with EVERBUILD® Quick Mac Cold Joint Sealer, re-apply and rake to 45mm, and compact as above back to 30mm level with the existing surface.

Low traffic domestic areas: (eg driveways, garden paths)

Prepare, compact base, and prime vertical surfaces in the same way as above, but lesser depths of EVERBUILD® Quick Mac Cold Joint Sealer may be used if required. Holes are filled to 50% greater than their depth and compacted level. NOTE: do not use at as a final wearing course at less than 20mm in compacted depth.

Documents