Product Data Sheet Show all documents
EVERBUILD® 730 Uniflex Flexible

EVERBUILD® 730 Uniflex Flexible

A CEMENTITIOUS WALL & FLOOR TILE GROUT FOR JOINTS UP TO 15 mm WIDE

2.5 kg White EVERBUILD® 730 Uniflex Flexible is a cementitious grout designed specifically for wall and floor tile applications for joints up to 15 mm wide. The added powder polymer in EVERBUILD® 730 Uniflex Flexible provides flexibility and water resistance to give a durable water repellent finish. Suitable for most common tiles including ceramic, natural stone and porcelain. EVERBUILD® 730 Uniflex Flexible contains MouldShield® for long lasting anti-fungal protection against black mould.

  • Excellent water resistance.
  • With added polymer for improved flexibility.
  • Fills joints from 3-15 mm.
  • Excellent crush & flexural strength.
  • Resists mould growth for up to 10 years (simulated ageing).
  • Interior/exterior use.
  • 5-8 hours initial set time. Sets hard in 24 hours.
  • 3-15 mm bed thickness.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Grouting floor and wall tiles on most surfaces up to 15 mm in joint width.
  • Recommended for grouting domestic, communal and power shower areas.
  • Suitable for use with ceramic, porcelain, quarry, natural stone tiles and mosaics.
  • Suitable for use with underfloor heating.
 

Advantages

  • Excellent water resistance.
  • With added polymer for improved flexibility.
  • Fills joints from 3-15 mm.
  • Excellent crush & flexural strength.
  • Resists mould growth for up to 10 years (simulated ageing).
  • Interior/exterior use.
  • 5-8 hours initial set time. Sets hard in 24 hours.
  • 3-15 mm bed thickness.

Packaging

2.5 kg sack.

Colour

Fine powder in White.

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Tested in accordance with EN13888 – Class CG2WA
Product Information

Shelf Life

12 months when stored according to manufacturer's instructions.

Storage Conditions

Store at moderate (+5 °C to +25 °C) temperatures. PROTECT FROM DAMP.

Density

1.3-1.5 g/cm³ (approx)
Technical Information

Service Temperature

-30 °C to +100 °C.

Application

Application Information

Ambient Air Temperature

+5 °C to +35 °C

Open Time

45-60 mins @20 °C
Consumption

Yield

1.5 kg of grout per 5 sq.metres of 150 x 150 mm tiles with a joint width of 3 mm.
Application steps

APPLICATION

In a suitable container add approximately 3 parts powder to 1 part water and mix to a smooth paste. Always add powder to the water. Leave to stand for 2-3 minutes then remix. Do not mix more grout than can be applied in 45-60 minutes. Do not add further water to reconstitute the grout once it begins to cure as this will affect the final strength of the product.
Apply EVERBUILD® 730 Uniflex Flexible using a sponge or a squeegee. Press the grout firmly into the joints ensuring no air voids are present. Remove any excess grout from the tiles whilst still wet. Remaining residues can be removed once the grout begins to cure (15-20 minutes) with a soft damp cloth or sponge. Dry residues can be removed once cured with a soft dry cloth. Clean all tools/equipment with warm soapy water after application.
Drying time 8-24 hours depending on size of joint. Do not walk on floors for at least 24 hours after application. Protect joints from running water until the grout has completely cured.

Documents