Product Data Sheet Show all documents
Sika® Forever White Grout Reviver

Sika® Forever White Grout Reviver

FOR RESTORING DISCOLOURED AND DIRTY GROUT TO A BRIGHT WHITE FINISH

Sika® Forever White Grout Reviver is the easy way to revive and restore discoloured and dirty grout to an extra brilliant white finish. 
Sika® Forever White Grout Reviver integrates Mould Shield®, a leading anti-bacterial solution, to protect against black mould, mildew and bacterial growth which are commonly found in areas of high humidity. Manufactured in the UK with Sika®, these high-quality antimicrobial products are rigorously tested to show no mould growth after 10 years of simulated ageing.
Copies of test data available on request.  

  • Excellent water resistance. 
  • Dries brilliant white.
  • Contains Mould Shield® to prevent mould growth.
  • Ready to use formula.
  • Apply straight from the tube with the easy to use sponge applicator.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Kitchen/Bathroom Walls.
  • Shower areas.
  • Wet rooms.

Advantages

  • Excellent water resistance. 
  • Dries brilliant white.
  • Contains Mould Shield® to prevent mould growth.
  • Ready to use formula.
  • Apply straight from the tube with the easy to use sponge applicator.

Packaging

200 mL Squeezy Tube

Product Details

Product Information

Shelf Life

Minimum of 12 months when stored according to the manufacturer's instructions.

Storage Conditions

Store at +5 to +25 °C. PROTECT FROM FROST.

Application

Application steps

SUBSTRATE PREPARATION

Surfaces must be clean, dry, dust free and sound. Remove any old mould with Everbuild® 404 Fungicidal Wash prior to application and allow to dry. Replace any damaged, loose or cracked grouting by raking and re-grouting with Sika® Forever White Powder Wall Tile Grout and allow to dry. Certain tiles (e.g. non-glazed, metallic, textured or hand painted) may not be compatible with this product. Always test a small inconspicuous area for compatibility prior to full scale application.

APPLICATION

Remove cap and squeeze the Grout Reviver tube until product is expelled. Continue squeezing and apply to grout lines in a zig zag motion ensuring even coverage and working well into existing grout. Allow to dry for 3-4 hours then remove any excess product from tiles with a damp cloth or sponge. Any residue still remaining on tiles can easily be removed by moistening, leaving for 15 minutes and then removing as above. 
A second application may be necessary for badly stained areas once the first coat is dry (3-4 hours). After the removal of residues, polish tiles with a clean dry cloth.
Avoid wetting tiles for 24 hours after application (longer in cold, poorly ventilated/humid conditions).
Rinse applicator sponge in warm water after use and replace cap to enable product to be used again. Wash hands with warm water and soap after use.

 

Documents

FAQ

Does Forever White® Grout Reviver work on all types of tile?

Avoid non-glazed, metallic, textured, or hand-painted tiles without testing a small area first.

How should I clean tiles after application?

Use a damp cloth to wipe away excess after 3–4 hours, then polish with a dry cloth.

Will Forever White® Grout Reviver resist black mould from appearing?

Yes. It contains Sika’s Mould Shield®, tested to resist mould, mildew, and bacterial growth in the product for up to 10 years.

Can I apply Forever White® Grout Reviver directly over existing grout?

Yes, it’s designed to be applied directly onto clean, dry grout lines. Just make
sure to remove any mould or loose material beforehand for the best results.

Is Forever White® Grout Reviver ready to use?

Yes, it's a ready-mixed formula that can be applied directly from the tube.

How long do I need to wait before exposing the area to water?

Avoid wetting the area for at least 24 hours after application to ensure proper drying and durability.

Can I use Forever White® Grout Reviver on floor grout?

No, it's designed for wall applications only.