SikaBiresin® CR83

Epoxy resin system with extremely low viscosity designed specifically for the infusion process
For the production of high performance fibre reinforced composites parts and molds
The system has thermal properties up to 80 °C
SikaBiresin® CR83 epoxy resin has a low tendency to crystallize

3 hardeners (B) give a wide range of processing times
The reactivity can be adapted by mixing the hardeners
Fast infusion and good wet-out of fabrics and non-wovens due to low viscosity and good wetting characteristics even at low temperatures
All systems DNV GL approved. Certificate No. TAK000019Z
Glass transition temperatures up to 80 °C dependent on curing conditions
Carbon fibres are wet out well by all of the resin systems
SikaBiresin® CR83 resin (A) has a low tendency to crystallize

Find a Distributor

SikaBiresin® CR83 is especially suited to the infusion and injection processes due to its low viscosity range
It can be used in the marine and general industrial composite areas

3 hardeners (B) give a wide range of processing times
The reactivity can be adapted by mixing the hardeners
Fast infusion and good wet-out of fabrics and non-wovens due to low viscosity and good wetting characteristics even at low temperatures
All systems DNV GL approved. Certificate No. TAK000019Z
Glass transition temperatures up to 80 °C dependent on curing conditions
Carbon fibres are wet out well by all of the resin systems
SikaBiresin® CR83 resin (A) has a low tendency to crystallize

Documents