Product Data Sheet Show all documents
EVERBUILD® PINKGRIP® MS

EVERBUILD® PINKGRIP® MS

A HYBRID POLYMER GRAB ADHESIVE.

EVERBUILD® PINKGRIP® MS is a hybrid polymer grab adhesive. This next generation product is designed to overcome the limitations of traditional grab adhesives, whilst maintaining the legendary grab strength of the original Pinkgrip formulation. EVERBUILD® PINKGRIP® MS will bond almost all common building materials, porous and non-porous, indoors and out. It will even work on wet surfaces or underwater.

  • Excellent break off.
  • Suitable for interior and exterior use.
  • Incredible grab strength.
  • Fast curing.
  • Waterproof & Weather Resistant.
  • UV & Chemical resistant.
  • Primerless adhesion to common building substrates, porous and non-porous.
  • Low dirt pick up.
  • Virtually odourless.
Product Data Sheet Show all documents

Usage

  • Bonding dado rails, architrave and skirting.
  • Fixing battens directly onto walls without fastenings.
  • Bonding stair nosing to concrete or wooden stairs.
  • Applications where resistance to chemical spillage is required.
  • Any application requiring high performance, durable bonding.
  • Bonding mirrors to most common substrates.
  • As a high quality nail replacement adhesive, even to wet surfaces.
 

Advantages

  • Excellent break off.
  • Suitable for interior and exterior use.
  • Incredible grab strength.
  • Fast curing.
  • Waterproof & Weather Resistant.
  • UV & Chemical resistant.
  • Primerless adhesion to common building substrates, porous and non-porous.
  • Low dirt pick up.
  • Virtually odourless.

Packaging

290 ml plastic cartridge 

Colour

Pink

Product Details

Product Information

Shelf Life

12 months from date of manufacture.

Storage Conditions

Store in cool, dry conditions between +5 and +25 ˚C.  

Density

1.63 g/cm3
Technical Information

Shore A Hardness

60 - 70

Service Temperature

-50 °C to +35 °C

Application

Application Information

Sagging

Nil

Ambient Air Temperature

+5 °C to +35 °C

Curing Time

1 - 3 mm per 24 hours (at +23 °C and 50 % RH)

Skin Time / Laying Time

20 - 40 mins
Consumption

Consumption

Approx. 10 linear meters for a 6 mm diameter bead.
Application steps

SUBSTRATE PREPARATION

  • Surfaces must be clean and free from dust, grease, loose material etc.
  • Prime dusty surfaces with Everbuild® 501 PVA Bond diluted 1:4 with water and allow to dry.
  • Apply using a standard sealant gun, cut tip of cartridge, apply nozzle and cut an opening to suite the required bead size.
 

CLEANING OF TOOLS

Clean up excess adhesive immediately with a cloth/white spirits or Everbuild® Wonder Wipes.  Once cured remove mechanically.

Documents