Product Data Sheet Show all documents
EVERBUILD® D4 Wood Adhesive

EVERBUILD® D4 Wood Adhesive

An industrial grade D4 wood adhesive based on hybrid resin technology

EVERBUILD® D4 Wood Adhesive is an industrial grade D4 wood adhesive based on the latest hybrid polymer technology. EVERBUILD® D4 Wood Adhesive provides the user with a waterproof D4 grade wood adhesive with none of the safety issues associated with conventional isocyanate containing (polyurethane) D4 grades. EVERBUILD® D4 Wood Adhesive can be used internally and externally and gives a high strength, water, impact and temperature resistant bond that is usually stronger than the wood itself.

  • Excellent rate of bond strength development.
  • D4 water resistance, suitable for constant water immersion.
  • Interior/exterior use.
  • Low timber staining characteristics.
  • Water based - easy clean up.
  • Suitable for radio frequency cure.
   Viscosity  ca. 5500 mPa.s pH ca. 3 Minimum Film Forming Temperature (°C) Approx 8 High Temperature Stability (1 week @ 50 °C)Stable
Product Data Sheet Show all documents

Usage

  • As a general woodworking/joinery adhesive.
  • General assembly line work.
  • RF/HF cure systems, wood on wood laminating, furniture assembly and household DIY use.
 

Advantages

  • Excellent rate of bond strength development.
  • D4 water resistance, suitable for constant water immersion.
  • Interior/exterior use.
  • Low timber staining characteristics.
  • Water based - easy clean up.
  • Suitable for radio frequency cure.
   Viscosity  ca. 5500 mPa.s pH ca. 3 Minimum Film Forming Temperature (°C) Approx 8 High Temperature Stability (1 week @ 50 °C)Stable

Packaging

1 L bottle and 25 L plastic container

Colour

White (dries clear)

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to the international standards EN 204 (D4) and WATT 91. 
Product Information

Chemical Base

Waterbased Polymer.

Shelf Life

6 months from date of manufacture in original unopened containers.

Storage Conditions

To ensure safe storage of product, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. The emulsion must be stored at a temperature above freezing. A temperature of 15 - 23 °C for not more than six months is recommended. Higher temperatures will affect quality and cause the formation of crusts and skins, especially if the containers are not tightly closed or subjected to direct sunlight for long periods.

If these conditions cannot be met, please refer to our Technical Service Department who will advise on storage stability.

Density

ca. 1.07 g/cm3

Application

Application Information

Open Time

8 – 9 mins @ +20 °C and 150 g/m2
Consumption

Yield

150-180 g/m2 (assembly gluing)
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and free from grease.

 

Documents