Product Data Sheet Show all documents
EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive

EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive

One part moisture curing wood adhesive in gel and liquid form

EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive Liquid is ideal for larger applications, or in the workshop where greater economy is required. Sets hard in 5 minutes. Conforms to EN 204 D4 waterproofing. EVERBUILD® Lumberjack® 5 Min PU Wood Adhesive Gel is a thixotropic, gap filling gel which sets hard in just 5 minutes. Particularly suitable for equipment manufacture and production line applications where rapid handling is required.

  • Fast setting – 5 minute set (Typical PVA based wood glue – 8-12 hours).
  • Exceptional bond strength to wood and most common building surfaces.
  • Internal and external use - excellent weathering and aging properties.
  • Fully water proof to EN204 D4.
  • Products foam slightly on application to fill small gaps and increase overall bond strength.
  • Excellent chemical resistance.
Specific Data Contents  100 % prepolymers and catalyst (solvent free) Solids 100 % (Solvent free) Viscosity Gel - 200×103  mPa.s
Liquid - 2×103  mPa.s
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • General wood jointing and construction.
  • Window and door frame manufacture.
  • Door manufacture.
  • Furniture manufacture.
  • Construction of staircases and ladders.
  • As a high quality insulation adhesive for foam/glass wool/fibre boarding.
 

Advantages

  • Fast setting – 5 minute set (Typical PVA based wood glue – 8-12 hours).
  • Exceptional bond strength to wood and most common building surfaces.
  • Internal and external use - excellent weathering and aging properties.
  • Fully water proof to EN204 D4.
  • Products foam slightly on application to fill small gaps and increase overall bond strength.
  • Excellent chemical resistance.
Specific Data Contents  100 % prepolymers and catalyst (solvent free) Solids 100 % (Solvent free) Viscosity Gel - 200×103  mPa.s
Liquid - 2×103  mPa.s

Packaging

Liquid - 750 g Plastic Bottle / Gel - 310 ml Cartridge

Colour

Liquid - Brown / Gel -Transparent

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to EN204 class D4.
Product Information

Chemical Base

Polyurethane

Shelf Life

Twelve months from date of manufacture in original unopened containers. 

Storage Conditions

Store in original unopened containers between +5 and +25 °C. Reseal immediately once used or disposal will be necessary.

Density

Liquid - 1.12 g/cm3 / Gel - 1.10 g/cm3

Application

Consumption

Yield

Liquid - Approx 400 g/m2,  Gel - Approx 225-355 ml/m2
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. At least one of the materials must be porous. Roughen non-porous surfaces to give a key for the adhesive. To assist cure and achieve maximum bond strength, slightly moisten one surface with a damp cloth. Do not over wet. 

Documents