Product Data Sheet Show all documents
EVERBUILD FOREVER WHITE® Grout Reviver

EVERBUILD FOREVER WHITE® Grout Reviver

For restoring discoloured and dirty grout to a bright white finish

EVERBUILD FOREVER WHITE® Grout Reviver is the easy way to revive and restore discoloured and dirty grout to a bright white finish. With Mould Shield® the leading anti-bacterial solution integrated into the manufacturing process, EVERBUILD FOREVER WHITE® Grout Reviver is proven to stop mould, mildew and bacterial growth. Mould Shield®, in conjunction with Everbuild deliver high quality antimicrobial products, manufactured in the UK and rigorously tested in accredited microbiological laboratories to show no mould growth after 10 years simulated ageing and actively prevent the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity. Copies of test data are available upon request. Forever White Grout Reviver dries to an extra brilliant white finish.   

  • Excellent water resistance.
  • Dries brilliant white.
  • Contains Mould Shield® - prevents mould growth.
  • Ready mixed formula - no mixing, no mess.
  • Apply straight from the tube with the easy to use applicator.
Product Data Sheet Show all documents

Usage

  • Kitchen/Bathroom walls.
  • Shower areas.
  • Wet rooms.

Advantages

  • Excellent water resistance.
  • Dries brilliant white.
  • Contains Mould Shield® - prevents mould growth.
  • Ready mixed formula - no mixing, no mess.
  • Apply straight from the tube with the easy to use applicator.

Packaging

200ml Squeezy Tube

Colour

White

Product Details

Product Information

Shelf Life

Minimum 12 months when stored according to manufacturer’s instructions.

Storage Conditions

Store at 5 - 25°C. PROTECT FROM FROST.

Density

1.46 g/cm3

 

Application

Application steps

SUBSTRATE PREPARATION

Surfaces must be clean, dry and dust free. Remove any old mould with Everbuild 404 Fungicidal Wash prior to application and allow to dry. Replace any damaged, loose or cracked grouting by raking and re-grouting with Everbuild Tile Adhesive; then allowing to dry. Certain tiles (e.g. non glazed; metallic; textured or hand painted) may not be compatible with this product. Always test a small inconspicuous area for compatibility prior to full scale application.

APPLICATION

Remove cap and squeeze the EVERBUILD FOREVER WHITE® Grout Reviver tube until product is expelled. Continue squeezing and apply to grout lines in a zig zag motion ensuring even coverage and working well into existing grout. Allow to dry for 3-4 hours then remove any excess product from tiles with a damp cloth or sponge. Any residue still remaining on tiles can easily be removed by moistening; leaving for 15 minutes then removing as above.

A second application may be necessary for badly stained areas; after first coat is dry (3-4hours). After removal of residues; polish tiles with a clean dry cloth.

Avoid wetting tiles for 24 hours after application (longer in cold poorly ventilated/humid conditions).

Rinse applicator sponge in warm water after use and replace cap to enable product to be used again. Wash hands with warm water and soap after use.

Documents