Product Data Sheet Show all documents
EVERBUILD® 711 Rapid Set Flexiplus

EVERBUILD® 711 Rapid Set Flexiplus

A quick setting, flexible floor and wall tile adhesive

EVERBUILD® 711 Rapid Set Flexiplus is a rapid setting ceramic tile adhesive with added latex powder for improved flexibility. EVERBUILD® 711 Rapid Set Flexiplus is used for bonding ceramic, porcelain and large format tiles to prepared floors and walls without the need for a separate flexible additive. Can be used internally and externally and bonds to most building substrates such as concrete, cement screeds and render, timber, existing ceramic tiles, dense block work and unskimmed plasterboard. The adhesive is water-resistant.

  • Rapid set - same day fixing and grouting
  • Internal/external use
  • Excellent water resistance
  • Extremely high bond strength
  • Can be used on prepared wooden floors
  • Bonds to most building substrates
  • Suitable for use with underfloor heating
  • With added latex powder for improved flexibility
Application Temp 5°C to 35°C Service Temp -30 to 100°C. Bed Thickness6mmSetting Time2-3 hours hard in 24 hoursCoverageApproximately 4kg/m²
Product Data Sheet Show all documents

Usage

  • Suitable for porcelain and large format tiles on walls
  • For securing floor and wall tiles to most surfaces
  • For heavy duty areas such as heavily walked floors
  • Recommended for tiling domestic, communal and power showers
  • Suitable for constant immersion e.g. swimming pools
  • May also be used for patching small areas in concrete/stone etc.
 

Advantages

  • Rapid set - same day fixing and grouting
  • Internal/external use
  • Excellent water resistance
  • Extremely high bond strength
  • Can be used on prepared wooden floors
  • Bonds to most building substrates
  • Suitable for use with underfloor heating
  • With added latex powder for improved flexibility
Application Temp 5°C to 35°C Service Temp -30 to 100°C. Bed Thickness6mmSetting Time2-3 hours hard in 24 hoursCoverageApproximately 4kg/m²

Packaging

10kg and 20kg bags

Colour

Fine grey powder

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Conforms to EN12004:2007 for Class C2FTES1.
Product Information

Shelf Life

9 months from date of manufacture when stored according to manufacturer’s instructions.

Storage Conditions

Store at 5°C to 25°C. PROTECT FROM FROST.

Density

1.5g/cm³ (approx) at 20°C

 

Application

Application Information

Open Time

20 - 35 mins @20°C
Application steps

APPLICATION

All surfaces should be clean, dry and free of dust and loose material before commencing. Refer to above for specific surfaces. Always add powder to water. Mix approximately three and a half parts by volume powder to 1 part by volume water (approx 5 to 1 by weight) and mix to a slump free mortar. Spread adhesive to a depth of 6mm and comb to 3mm to leave a solid bed with 3mm ribs. Secure tiles with a slight twist action to ensure no voids remain. Tiles should be fixed within 20 min of spreading depending on absorbency of substrate and temperature. Lightly touch the adhesive periodically and if a skin has formed, remove the adhesive and apply a new layer. It is good practice to periodically remove a tile and check that the adhesive covers a minimum of 75% of the tile. Never add further water once the adhesive has started to go off. This will destroy the bond strength.

All surplus adhesive must be removed whilst the adhesive is still wet using a dampened cloth or sponge, particularly along the grout lines.

 

Documents