SikaBiresin® CR82

Epoxy resin system designed for hand lay-up, vacuum bagging and filament winding processes
Especially for applications where curing temperatures of ≥ 75 °C cannot be implemented

4 hardeners (B) with just one mixing ratio by weight, give a wide range of processing times
The reactivity can be adapted by mixing the hardeners
SikaBiresin® CR82 systems have optimized viscosity and thus good impregnation and non-draining properties
Some systems are DNV GL approved. Certificate No. TAK00001YC
Glass transition temperature of approx. 85 °C can be achieved dependent on curing conditions
Hardeners (B) Biresin® CH80-2 and CH80-6 are also available in blue
Parts produced with hardeners SikaBiresin® CH80-1 and SikaBiresin® CH80-2 can be demolded after curing at room temperature

Especially suitable for the hand lay-up process and can be used in many areas incuding marine and general industrial composite

4 hardeners (B) with just one mixing ratio by weight, give a wide range of processing times
The reactivity can be adapted by mixing the hardeners
SikaBiresin® CR82 systems have optimized viscosity and thus good impregnation and non-draining properties
Some systems are DNV GL approved. Certificate No. TAK00001YC
Glass transition temperature of approx. 85 °C can be achieved dependent on curing conditions
Hardeners (B) Biresin® CH80-2 and CH80-6 are also available in blue
Parts produced with hardeners SikaBiresin® CH80-1 and SikaBiresin® CH80-2 can be demolded after curing at room temperature

Documents