Product Data Sheet Show all documents
EVERBUILD® Decorators Flexible Filler

EVERBUILD® Decorators Flexible Filler

Fast drying, acrylic based filler that remains permanently flexible

EVERBUILD® Decorators Flexible Filler is a filler that can be overpainted with all paint types, or covered over with wallpaper. No sanding down is required.

  • Fast drying - can be overpainted in 1 hour.
  • Permanently flexible.
  • Easy water clean up.
  • Excellent slump resistance.
  Elongation at break >100% ISO8339Hardness (Shore A) Approximately 50 Slump Resistance No slump to ISO7390 Movement Accommodation Low (+/- 5%)Tack Free Time15 to 60 mins, dependent on thickness, ambient temperature and humidity                                                                                                                                                                                                                                                       Chemical Resistance Dilute acids Fair Aliphatic Hydrocarbons Fair Dilute AlkalineFairAromatic HydrocarbonsPoor
Product Data Sheet Show all documents

Usage

  • For sealing and filling cracks and gaps prior to decorating.
  • For use around skirting boards, ceiling cornices, window and door frames, stair treads and risings and fixtures adjoining walls.
  • Can be used to fill damage plaster.

Advantages

  • Fast drying - can be overpainted in 1 hour.
  • Permanently flexible.
  • Easy water clean up.
  • Excellent slump resistance.
  Elongation at break >100% ISO8339Hardness (Shore A) Approximately 50 Slump Resistance No slump to ISO7390 Movement Accommodation Low (+/- 5%)Tack Free Time15 to 60 mins, dependent on thickness, ambient temperature and humidity                                                                                                                                                                                                                                                       Chemical Resistance Dilute acids Fair Aliphatic Hydrocarbons Fair Dilute AlkalineFairAromatic HydrocarbonsPoor

Packaging

290ml cartridge 200ml Easi Squeeze Tube

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Certified under the harmonized European standard EN15651 for façade interior applications in compliance with the Construction Product Regulation.
Product Information

Chemical Base

Ready to use thixotropic paste

Shelf Life

Up to 36 months when stored in unopened cartridges under cool dry conditions.  AVOID FROST

Storage Conditions

Store in cool dry conditions and protect from frost

Density

1.6 - 1.7 g/cm³

Solid Content

~81%

Application

Application Information

Ambient Air Temperature

+4°C to +40°C

Substrate Temperature

-15°C to +75°C

Drying time

3 to 5 days, dependent on thickness, ambient temperature and humidity

 
Application steps

APPLICATION

Cartridge: cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45° with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the gun trigger and keeping the gun at a constant angle to the surface being sealed.

Easi-squeeze tube: cut the tip of the tube with an opening slightly larger than the gap to be sealed. Squeeze the tube to apply, keeping the tip at a constant angle to the surface being sealed.

Smooth down within 15 minutes of application using a wetted spatula, piece of wood or wetted finger. Care should be taken at this point not to saturate the surface as this will delay drying. Any excess sealant etc. can be removed using a sponge and warm water. Can be overpainted after 1 hour.

Documents