EVERBUILD® EVERFLEX® 175 Universal Acrylic Sealant

Certified under the harmonized European standard EN15651 for façade and sanitary applications in compliance with the Construction Product Regulations.

Up to 36 months when stored in unopened cartridges under cool dry conditions. 

Store in cool dry conditions and protect from frost. AVOID FROST.

1.67-1.71 g / cm³

80 - 84%

Can be used in contact with most building and decorating materials but should not be used against bituminous materials.

Approximately 40

Low to medium (+/- 7.5%) EN15651-1:2012

Dilute Acids - Fair

Dilute Alkaline - Fair

Aliphatic Hydrocarbons - Fair

Aromatic Hydrocarbons - Poor

-15°C to +75°C

Full cure from 3 to 5 days, dependent on thickness, ambient temperature and humidity

15 to 60 mins, dependent on thickness, ambient temperature and humidity

All surfaces must be clean and dust free.  All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with Everbuild PVA bond diluted 1:4 with water. This product  can be applied to slightly damp, but not wet surfaces.