Product Data Sheet Show all documents
EVERBUILD® External Frame Sealant

EVERBUILD® External Frame Sealant

Acrylic sealant for internal and external use around window and door frames.

EVERBUILD® External Frame Sealant is a high quality acrylic based sealant that provides a long lasting, permanently flexible seal that can be overpainted when cured.

  • Permanently flexible
  • Adheres to most surfaces.
  • Mould resistant.
  • Overpaintable.
  • Easy clean up
Application Temp. Range +4°C to +40°C Form Ready to use thixotropic paste. Slump Resistance No slump at 25°C when placed in a 20mm x 10mm vertical channel
Product Data Sheet Show all documents

Usage

  • Internal and external sealing around timber and metal window and door frames.
  • Internal sealing around PVCu window and door frames.
  • Sealing cracks and gaps in brickwork, stone and concrete.
 

Advantages

  • Permanently flexible
  • Adheres to most surfaces.
  • Mould resistant.
  • Overpaintable.
  • Easy clean up
Application Temp. Range +4°C to +40°C Form Ready to use thixotropic paste. Slump Resistance No slump at 25°C when placed in a 20mm x 10mm vertical channel

Packaging

290ml Catridge

Colour

White, Brown, Stone and Grey

Product Details

Product Information

Chemical Base

Acrylic

Shelf Life

36 months from date of manufacture

Storage Conditions

Store in cool dry conditions and protect from frost

Density

1.6 - 1.7 g/cm³

Solid Content

~83%
System information

Compatibility

Can be used in contact with most building and decorating materials but should not be used against bituminous materials.
Technical Information

Shore A Hardness

Approximately 30

Movement Capability

Low to medium (+/- 12.5%) EN15651-1

Chemical Resistance

  Dilute Acids  - Poor                               Dilute Alkaline - Poor

  Aliphatic Hydrocarbons - Fair              Aromatic Hydrocarbons - Poor

Service Temperature

-15°C to +75°C

Application

Application Information

Curing Time

3 to 5 days, dependent on thickness, ambient temperature and humidity

Tack Free Time

15 to 60 mins, dependent on thickness, ambient temperature and humidity
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean and dust free.  All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with Everbuild PVA bond diluted 1:4 with water. This product can be applied to slightly damp, but not wet surfaces.

CLEANING OF TOOLS

Any excess sealant etc. can be removed using a sponge and warm water.             

Documents