Product Data Sheet Safety Data Sheet Show all documents

EVERBUILD® EVERFLEX® 565 Clean Room Silicone

A neutral curing hygienic sealant with Mould Shield antibacterial protection

EVERBUILD® EVERFLEX® 565 Clean Room Silicone is a low modulus, neutral cure, odourless silicone sealant that adheres to a wide range of both porous and non-porous surfaces.

  • Mould Resistant for up to 10 years (simulated age testing for internal use) AATCC 30 part 3 with Mould Shield.
 
  • Bacterial resistance for up to 10 years (simulated age testing for internal use)  ISO22196.
  • Excellent tooling and slow skinning properties for industrial/large scale applications.
  • Excellent adhesion properties to most surfaces including glass, metal, plastics, wood (painted/unpainted) uPVC and Polycarbonate.
  • High viscosity non-slump formula.
  • Excellent external weathering properties.
  • Resistant to fumed hydrogen peroxide and formaldehyde.
  • Shrinkage to ISO 10563: <5%
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Food preparation areas and refrigeration units.
  • Medical and sterile areas.
  • Hospital, Pharmaceutical and laboratory clean room environments.
  • Perimeter pointing internally and externally of uPVC, Wood and powder coated window frames.
  • Weather sealing and joint sealing to preformed panels and curtain walling and draught proofing.
  • Parapet and roof sealing applications.
  • Sanitary applications.

Advantages

  • Mould Resistant for up to 10 years (simulated age testing for internal use) AATCC 30 part 3 with Mould Shield.
 
  • Bacterial resistance for up to 10 years (simulated age testing for internal use)  ISO22196.
  • Excellent tooling and slow skinning properties for industrial/large scale applications.
  • Excellent adhesion properties to most surfaces including glass, metal, plastics, wood (painted/unpainted) uPVC and Polycarbonate.
  • High viscosity non-slump formula.
  • Excellent external weathering properties.
  • Resistant to fumed hydrogen peroxide and formaldehyde.
  • Shrinkage to ISO 10563: <5%

Packaging

295ml cartridges

Colour

White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Tested and approved to 21CFR177.2600 by IANESCO (France), food preparation area certification.
  • Conforms to the requirements of ISO 11600 F25LM.
  • Bacterial resistance determined by ISO22196:2011.
  • Certified under the harmonized European standard EN15651 for façade, cold climate and sanitary applications in compliance with the Construction Product Regulation.
Product Information

Shelf Life

12 months from date of manufacture.

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C. 

Density

1.33 - 1.37 g/cm³ 
Technical Information

Shore A Hardness

20-30 (IHT RD15)

Tensile Strength

At break: 0.5Mpa (ISO 8339)

Tensile Stress at Specified Elongation

Tensile Modulus at 100% Elongation to ISO8339: ~0.3Mpa

Elastic Recovery

>80% (to ISO 7389)

Service Temperature

-50°C to + 150°C

Joint Design

Maximum Joint Width: 50mm

Joint Ratio: Max depth 50% of joint width

Application

Application Information

Ambient Air Temperature

+5°C to + 40°C

Curing Time

mm/1 day approx 2

mm/3 day approx 6

mm/7 day approx 9

(IHT S8)

Skin Time

30-45 mins 
Consumption

Consumption

ca. 10.5 linear metres 6mm diameter bead.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion.  EVERBUILD® EVERFLEX® 565 Clean Room Silicone does not require priming on most surfaces however adhesion tests are recommended prior to full scale application. Where priming is required use Everbuild P1 primer for porous surfaces and NP2 primer for Non-Porous.     

CLEANING OF TOOLS

Uncured sealant - Everbuild White Spirit.
Cured sealant - Everflex Silicone Eater.

Documents