The tightness of buildings is of great significance in order to achieve low energy ratings. Without proper joint sealing it would be impossible to insulate a building sufficiently.
Sika’s range of elastic joint sealants can accommodate thermal and structural movements without breaking or losing the adhesion to the adjacent building elements. SikaHyflex®, Sikaflex® and Sikasil® elastic joint sealants are high-performance products that provide the necessary tightness under any environmental and load conditions.
Environmental impact from sealing
A Life Cycle Assessment (LCA) was made of the Sika products applied, to quantify their environmental impacts. The LCA is from cradle to gate, which means it investigates the potential environmental impacts from raw material acquisition and processing to manufacturing of the product, including packaging. The total amount of products used in the case study was:
- For connection joints: 31 kg
- For window manufacturing: 4 kg
Cumulative Energy Demand (CED) and the Global Warming Potential (GWP)
To compare the impacts with the benefits these products bring in the use phase of the building, the Cumulative Energy Demand (CED) and the Global Warming Potential (GWP) were analysed. The tightness of buildings is of great significance in order to achieve low energy ratings. Without proper joint sealing it would be impossible to insulate a building sufficiently.
Sika’s range of elastic joint sealants can accommodate thermal and structural movements without breaking or losing the adhesion to the adjacent building elements. SikaHyflex®, Sikaflex® and Sikasil® elastic joint sealants are high-performance products that provide the necessary tightness under any environmental and load conditions.
were analysed.
CED accounts for the consumption of energy resources, namely the primary energy from renewable and non-renewable resources. GWP measures the potential contribution to Climate Change, focusing on emissions of greenhouse gases, such as carbon dioxide (CO₂). For the 35 kg of products used:
- Cumulative Energy Demand (average) = 2.3 GJ
- Global Warming Potential (average) = 91 kg CO₂
Case study:
To illustrate and to prove how important sealants are to tighten building envelopes, measurements were performed on a real case study. Calculations were conducted by the University of Applied Science for Architecture Wood and Construction in Biel, Switzerland to determine the contribution of Sika’s sealant and adhesive technologies to the energy saving potential of the building. The case study is based on a house near Biel, Switzerland. The entire building envelope is insulated with exterior isolation and the window area is 32 m².
One small drop of sealant, ...
The gains of the applied products are obvious, showing the impacts of the products are negligible compared to the energy saving for a 20 year lifespan.
... one large drop in the energy bill
The overall net savings are 50 times (energy) and 96 times (CO₂) the impact values.
Energy and CO₂ savings from sealing
The following outcomes were observed:
- Due to innovative bonding technologies for window manufacturing, larger windows (allowing more daylight) with smaller frames and better insulation properties are possible. This yields 2.4 GJ savings per year.
- Sealants ensure a tight building envelope and prevent energy loss through air exchange. This yields 2.6 GJ savings per year.
- Sealants ensure a tight building envelope and prevent energy loss through wet insulation. This yields 1 GJ savings per year.
The energy saving potential through Sika solutions per year amounts to 6 GJ/year. Considering a life expectancy of 20 years for the window and the installation materials, the gains amount to 120 GJ. This means savings of about 3,300 liters heating oil and nearly nine tons CO₂.The tightness of buildings is of great significance in order to achieve low energy ratings. Without proper joint sealing it would be impossible to insulate a building sufficiently.
Sika’s range of elastic joint sealants can accommodate thermal and structural movements without breaking or losing the adhesion to the adjacent building elements. SikaHyflex®, Sikaflex® and Sikasil® elastic joint sealants are high-performance products that provide the necessary tightness under any environmental and load conditions.