Product Data Sheet Show all documents
EVERBUILD® Bath & Kitchen Sealant

EVERBUILD® Bath & Kitchen Sealant

HIGH QUALITY ACRYLIC BASED SEALANT FOR AREAS OF HIGH HUMIDITY.

EVERBUILD BATH AND KITCHEN SEALANT is an acrylic sealant, suitable for general sealing in and around the kitchen and bathroom. The product contains a powerful fungicide to prevent mould growth to the sealant, and can be overpainted.

  • Permanently flexible.
  • Adheres to most surfaces.
  • Mould resistant.
  • Overpaintable.
  • Easy clean up - wipe with wet cloth.
Form Ready to use thixotropic paste Slump Resistance No slump at 25 °C when placed in a 20 mm x 10 mm vertical channel Application Temp. Range +4 °C to +40 °C Compatibility Can be used in contact with most building and decorating materials but should not be used against bituminous materials.
Product Data Sheet Show all documents

Usage

  • Sealing around kitchen worktops etc.
  • Internal sealing around timber and metal window and door frames.                 
  • Internal sealing around PVCu window and door frames.
  • Sealing around baths, sanitary ware, basins and ceramics.
 

Advantages

  • Permanently flexible.
  • Adheres to most surfaces.
  • Mould resistant.
  • Overpaintable.
  • Easy clean up - wipe with wet cloth.
Form Ready to use thixotropic paste Slump Resistance No slump at 25 °C when placed in a 20 mm x 10 mm vertical channel Application Temp. Range +4 °C to +40 °C Compatibility Can be used in contact with most building and decorating materials but should not be used against bituminous materials.

Packaging

290 ml C3 Cartridge

200 ml C2 Cartridge

Colour

White

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Certified under the harmonized European standard EN15651 for façade interior use and sanitary applications in compliance with the Construction Product Regulation.
Product Information

Shelf Life

Up to 36 months when stored in unopened cartridges under cool dry conditions.

Storage Conditions

Store between 5 - 30°C in dry conditions and protect from frost.

Density

1.64 – 1.68 g/cm³
Technical Information

Shore A Hardness

Approximately 30

Movement Capability

Low to medium (±5 %)

Service Temperature

-15 °C to +75 °C

Chemical Resistance

Dilute Acids  - Fair                               Dilute Alkaline - Fair

Aliphatic Hydrocarbons - Fair              Aromatic Hydrocarbons - Poor

Application

Application Information

Curing Time

3 to 5 days, dependent on thickness, ambient temperature and humidity
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Highly porous substrates such as new plaster should first be primed with Everbuild® PVA bond diluted 1:4 with water. This product can be applied to slightly damp, but not wet surfaces.

 

Documents