Product Data Sheet Show all documents
EVERBUILD® General Purpose Silicone

EVERBUILD® General Purpose Silicone

A Multi-Purpose mid modulus silicone sealant

EVERBUILD® General Purpose Silicone is a multi-purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a fungicide to protect the sealant against the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity.

  • Permanently flexible.
  • Anti-fungal formula.
  • Quick curing - low dirt pick up.
  • Low viscosity for fast application.
  • High strength waterproof seal.
Movement Accomodation +/- 12.5% EN15651-1 Stress 0.2MPa @ 60% (ISO8339)
Product Data Sheet Show all documents

Usage

  • Sealing around baths, showers, basins and other sanitary ware.
  • As an adhesive for fixing PVCu trims, cladding and panels.
  • Sealing around worktops and laminates.
  • For aluminium gutter sealing.
  • General draught proofing.
 

Advantages

  • Permanently flexible.
  • Anti-fungal formula.
  • Quick curing - low dirt pick up.
  • Low viscosity for fast application.
  • High strength waterproof seal.
Movement Accomodation +/- 12.5% EN15651-1 Stress 0.2MPa @ 60% (ISO8339)

Packaging

280ml Cartridge with Nozzle. 

80ml Easi Squeeze tube.

Colour

White*, Clear*, Brown, Black and Grey.

* available in 80ml.

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Certified under the harmonized European standard EN15651 for façade, cold climate and sanitary applications in compliance with the Construction Product Regulation.
Product Information

Shelf Life

24 months from date of manufacture.

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C.

Density

~0.95 g/cm3
Technical Information

Shore A Hardness

15 - 25

Secant Tensile Modulus

0.2MPa @ 60% (ISO8339)

Service Temperature

-30°C to +150°C

Joint Design

Minimum joint width - 4mm

Maximum joint width - 25mm

Joint ratio - Maximum depth 50% of joint width.

Application

Application Information

Ambient Air Temperature

+5°C to +40°C

Curing Time

2mm per 24 hours

Skin Time

15 mins @ 20°C
Consumption

Yield

One cartridge will seal approx. 10 linear metres for a 6mm diameter bead.
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, steel and aluminium should be cleaned with a proprietary solvent prior to application for optimum adhesion. Porous surfaces may require priming - a small area should be tested first.

CLEANING OF TOOLS

Uncured sealant - white spirit; cured sealant - EVERFLEX SILICONE EATER

 

Documents