Product Data Sheet Show all documents
EVERBUILD® EVERFLEX® 500 Bath & Sanitary Silicone

EVERBUILD® EVERFLEX® 500 Bath & Sanitary Silicone

A premium quality mid modulus acetoxy cure silicone sealant

EVERBUILD® EVERFLEX® 500 Bath & Sanitary Silicone is an acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. Specifically designed for sanitary applications and for areas of high humidity.  It contains a powerful fungicide to prevent mold growth.

  • Will not discolour on aging even in humid/damp conditions.
  • Permanently flexible.
  • Quick curing - low dirt pick up.
  • Waterproof seal.
  • Certified under the harmonized European standard EN15651 for façade, glazing, cold climate and sanitary applications in compliance with the Construction Product Regulation.
Shrinkage ≤10% ISO7390 Application Temperature Resistance +5°C to +30°C Stress 0.3 MPa at 100% elongation DIN53504Cleaning Uncured sealant white spirit; Cured sealant: EVERFLEX SILICONE EATERCoverage@ 10 linear metres 9 x 9mm fillet joint
Product Data Sheet Show all documents

Usage

  • All internal sealing in areas of high humidity or subject to condensation.
  • Sealing around baths, showers, basins and sanitaryware.
  • Sealing around work tops and laminates.
  • Cap sealing to metal, timber and PVCu window frames.
  • As an adhesive for fixing PVCu trims and panels.
  • General weatherproofing applications.
 

Advantages

  • Will not discolour on aging even in humid/damp conditions.
  • Permanently flexible.
  • Quick curing - low dirt pick up.
  • Waterproof seal.
  • Certified under the harmonized European standard EN15651 for façade, glazing, cold climate and sanitary applications in compliance with the Construction Product Regulation.
Shrinkage ≤10% ISO7390 Application Temperature Resistance +5°C to +30°C Stress 0.3 MPa at 100% elongation DIN53504Cleaning Uncured sealant white spirit; Cured sealant: EVERFLEX SILICONE EATERCoverage@ 10 linear metres 9 x 9mm fillet joint

Packaging

295ml Cartridge

Colour

White, Translucent, Ivory, Sandstone & Manhattan Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Meets ISO11600 F and G 20LM.
Product Information

Shelf Life

24 months from date of manufacture.

Storage Conditions

Store in cool dry conditions between + 5°C and 25°C. 

Density

~1 g/cm3.
Technical Information

Shore A Hardness

10-20

Tensile Strength

1.2 MPa

Tensile Stress at Specified Elongation

0.3MPa at 100% elongation DIN53504

Movement Capability

+ or -20%

Service Temperature

-40°C to + 150°C

Joint Design

Joint Ratio - Maximum depth 50% of joint width

Minimum Joint Width - 5mm

Maximum Joint Width - 25mm

Application

Application Information

Curing Time

3mm per 24 hours

Skin Time

10 mins @ 20°C
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion.  Porous surfaces may require priming - a small area should be tested first.         

Documents