EVERBUILD FOREVER WHITE®

A superior hygienic silicone sealant for areas of high humidity.

EVERBUILD FOREVER WHITE® contains Mould Shield which actively protects the sealant against the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity. EVERBUILD FOREVER WHITE® is permanently waterproof and flexible and is produced from a superior silicone formula. EVERBUILD FOREVER WHITE® is tested and certified by an independent microbiological laboratory to show no mould growth after more than 10 yrs simulated ageing. Copies of test data are available.

Permanently waterproof
Highly flexible
10 year proven* protection against mould and discolouration

Seek a Stockist Contact Us

Product Data Sheet Show all documents

Usage

For sealing showers, baths, wetrooms, sanitary ware, ceramic tiles, kitchens and all applications in areas of high humidity where maximum hygiene protection is required.
Also ideal for sealing around window and door frames internally in areas subject to high condensation.

Advantages

Permanently waterproof.
Highly flexible.
10 year proven* protection against mould and discolouration.
High quality silicone.

Form Paste, 1 component RTV silicone Viscosity 100,000 - 200,000 cP Modulus at 100% Elongation 0.35 N/mm² to ISO8339 * simulated aging

Packaging

295ml Cartridge

Colour

White, Clear, Ivory and Grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Certified under the harmonized European standard EN15651 for façade, cold climate and sanitary applications in compliance with the Construction Product Regulation.

Product Information

Shelf Life

24 months from date of manufacture.

Storage Conditions

Store in cool dry conditions and protect from frost.

Density

0.98 - 1.05 g/cm³

Technical Information

Shore A Hardness

Tensile Strength

Approx. 0.6 N/mm² to ISO 8339

Movement Capability

25% EN15651-1

Service Temperature

-40°C to +180°C

Application

Application Information

Curing Time

Approx. 2-3 mm in 24 hours at 23°C/50% RH

Skin Time

Approx. 15-20 mins at 23°C/50% RH

Application steps

APPLICATION INSTRUCTIONS

All surfaces to be sealed must be clean and dry.
Fill deep gaps and voids with Everbuild Expanding Foam, then trim back level with bath/shower tray before applying Sealant.
When applying to plastic & acrylic baths, fill bath half full with water whilst sealing and during cure. This provides the mid point of any movement that will be encountered.
Always tool sealant down to ensure a proper bond is achieved.
Tool within 15 minutes of applying.