EVERBUILD® EVERFLEX® 565 Clean Room Silicone

• Tested and approved to 21CFR177.2600 by IANESCO (France), food preparation area certification.
• Conforms to the requirements of ISO 11600 F25LM.
• Bacterial resistance determined by ISO22196:2011.
• Certified under the harmonized European standard EN15651 for façade, cold climate and sanitary applications in compliance with the Construction Product Regulation.

12 months from date of manufacture.

Store in cool dry conditions between + 5°C and 25°C. 

1.33 - 1.37 g/cm³ 

20-30 (IHT RD15)

At break: 0.5Mpa (ISO 8339)

Tensile Modulus at 100% Elongation to ISO8339: ~0.3Mpa

>80% (to ISO 7389)

-50°C to + 150°C

Maximum Joint Width: 50mm

Joint Ratio: Max depth 50% of joint width

+5°C to + 40°C

mm/1 day approx 2

mm/3 day approx 6

mm/7 day approx 9

(IHT S8)

30-45 mins 

ca. 10.5 linear metres 6mm diameter bead.

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion.  EVERBUILD® EVERFLEX® 565 Clean Room Silicone does not require priming on most surfaces however adhesion tests are recommended prior to full scale application. Where priming is required use Everbuild P1 primer for porous surfaces and NP2 primer for Non-Porous.     

Uncured sealant - Everbuild White Spirit.
Cured sealant - Everflex Silicone Eater.