Product Data Sheet Safety Data Sheet Show all documents

Sika® Sanisil®

Acetoxy silicone sealant for sanitary applications

Sika® Sanisil® is an acetoxy curing, permanently flexible sanitary silicone containing a powerful anti-fungal compound for long term resistance to fungus and mildew.

  • Long term fungus and mildew resistance
  • High elasticity and flexibility
  • Quick curing - low dirt pick up
  • Very good UV and weathering resistance
  • Will not discolour on ageing even in humid/damp conditions
  • Adheres well to ceramics, acrylic, laminate, metal and glass
  • Solvent-free
Seek a Stockist Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

  • Interior and exterior use.
  • Sealing in areas of high humidity or subject to condensation.
  • Sealing around baths, showers, basins and sanitaryware.
  • Sealing around work tops and laminates.
  • Cap sealing to metal, timber and PVCu window frames.
  • As an adhesive for fixing PVCu trims and panels.
  • General weatherproofing applications.
 

Advantages

  • Long term fungus and mildew resistance
  • High elasticity and flexibility
  • Quick curing - low dirt pick up
  • Very good UV and weathering resistance
  • Will not discolour on ageing even in humid/damp conditions
  • Adheres well to ceramics, acrylic, laminate, metal and glass
  • Solvent-free

Packaging

300 ml cartridges

Colour

White and clear

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • EN 15651-1 F EXT-INT CC
  • EN 15651-2 G CC
  • EN 15651-3 S
  • Meets ISO11600
Product Information

Chemical Base

Acetoxy silicone

Shelf Life

Sika® Sanisil® has a shelf life of 24 months from the date of production, if it is stored properly in undamaged, original, sealed packaging, and if the storage conditions are met.

Storage Conditions

Sika® Sanisil® shall be stored in dry conditions, protected from direct sunlight and at temperatures between +5 °C and +25 °C. Protect from frost.

Density

1.00 kg/l approx.

(ISO 1183-1)
Technical Information

Shore A Hardness

10-20 approx. (after 28 days)

(ISO 868)

Tensile Strength

1.2 MPa

Tensile Stress at Specified Elongation

0.3MPa at 100% elongation (DIN53504)

Movement Capability

± 20%

(ISO 9047)

Service Temperature

−40 °C to +150 °C

Joint Design

Minimum Joint Width

Maximum Joint Width

Maximum Joint Depth

5mm

25mm

50% of joint width

Application

Application Information

Ambient Air Temperature

+5 °C to +30 °C

Curing Rate

3.0 mm/24 hours (23 °C / 50% r.h.)

(CQP 049-2)

Skin Time

10 minutes approx. (20 °C / 50% r.h.)

Consumption

Consumption

Approx.10 linear metres 9 x 9mm fillet joint
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean, dry and dust free. All loose or flaking surface coatings, and old sealant and mastic joints, should be removed before application. Glass, metal and aluminium should be cleaned with a proprietary solvent cleaner prior to application for optimum adhesion. Porous surfaces may require priming - a small area should be tested first.

For more detailed advice and instructions please contact our Technical Service Department.

CLEANING OF TOOLS

Clean all tools and application equipment immediately after use with Sika® Remover-208. Once cured, residual material can only be removed mechanically.

Documents

Related Products

Sika® Plastix-22A Premium Grade

Premium grade neutral cure silicone for glazing, facades and roofing applications
Sikaflex® PRO-3 Purform®

Polyurethane sealant for floor joints and civil engineering applications
Sikaflex® PRO-3 SL

HIGH-PERFORMANCE, SELF-LEVELING SEALANT FOR FLOORING AND CIVIL ENGINEERING APPLICATIONS