Product Data Sheet Show all documents
EVERBUILD STICK2® All Purpose Clear Adhesive

EVERBUILD STICK2® All Purpose Clear Adhesive

STRONG, QUICK DRYING ALL PURPOSE CLEAR ADHESIVE

EVERBUILD STICK2® All Purpose Clear Adhesive is a strong, clear, quick drying adhesive suitable for a variety of household repairs and hobby uses, and will stick to a variety of materials.  

  • Strong adhesion
  • Quick drying
  • 5 minutes repositionable
Product Data Sheet Show all documents

Usage

Stick ceramic, porcelain, wood, card, paper, most plastics, leather, cork, linoleum, rubber, stone, glass, metals and dense fabrics

Advantages

  • Strong adhesion
  • Quick drying
  • 5 minutes repositionable

Packaging

30ml tube

Colour

Clear

Product Details

Product Information

Shelf Life

3 years from date of manufacture in original unopened tubes.

Storage Conditions

Store between 5 and 25°C in dry conditions away from sources of ignition.

Application

Application steps

APPLICATION INSTRUCTIONS

Always open and use this product over a protected work surface.

Surfaces to be bonded must be clean, dry and free from dust. Use only in well ventilated areas.

POROUS SURFACES (fabrics, ceramics etc): Unscrew cap and spread a thin even layer of adhesive onto one surface. Press two surfaces together firmly.  

NON POROUS SURFACES (plastics, metals etc): Improve adhesion by abrading both surfaces with sandpaper. Unscrew cap and spread a thin even layer of adhesive onto both surfaces. Allow adhesive to dry to a tough tacky finish (about 5-10 mins) then press both surfaces together firmly.

In both cases, full strength is obtained after 24 hours at 20°C.

Replace cap immediately after use to keep adhesive usable.

CLEANING OF TOOLS

Clean tools etc with acetone or nail varnish remover, protecting surrounding surfaces.

Documents