Product Data Sheet Show all documents
EVERBUILD® Instant Nails®

EVERBUILD® Instant Nails®

A high strength solvent free gap filling multi use adhesive

EVERBUILD® Instant Nails® is a high strength solvent free gap filling multi use adhesive that provides a quick grab and replaces mechanical fixings in many home improvement applications.

  • Solvent free: environmentally friendly formulation.
  • Excellent adhesion/bond strength: adheres to most common surfaces - QUICKLY.
  • Good early grab properties: usable in both vertical and horizontal positions.
  • Dries white.
  • Will adhere to damp surfaces.
  • Water clean up: no hazardous solvents.
  • Overpaintable.
Product Data Sheet Show all documents

Usage

  • Sticking wood, metal, PVC, most plastics, glass, aluminium, concrete, render, stone, paper, cork, ceramics plaster/plasterboard, rockwool, Pufoam board, Styrofoam, breezeblock etc.
  • Bonding dado rails, architrave and skirting.
  • Fixing wall cladding direct to internal wall surfaces or timber battens.
  • Fixing battens directly onto walls without fastenings.
  • Bonding carpet gripper systems to most floors without the need for nails or tacks.
  • Bonding stair nosing to concrete or wooden stairs.
  • Securing aluminium or other skin panels to the framework of portable industrial buildings and caravans.
 

Advantages

  • Solvent free: environmentally friendly formulation.
  • Excellent adhesion/bond strength: adheres to most common surfaces - QUICKLY.
  • Good early grab properties: usable in both vertical and horizontal positions.
  • Dries white.
  • Will adhere to damp surfaces.
  • Water clean up: no hazardous solvents.
  • Overpaintable.

Packaging

Cartridge

Colour

White

Product Details

Product Information

Shelf Life

24 months from date of manufacture.

Storage Conditions

Store in cool dry conditions between +5 °C and +25 °C.

Density

1.65 - 1.75 g/cm³

Consistency

White thixotropic paste (ready to use).

Application

Application Information

Ambient Air Temperature

+4 °C to +35 °C

Open Time

Max 10 mins at +23 °C and 50 % R.H.

Curing Rate

Initial: 30 mins. Final: 24-48 hours (depending on substrate).
Consumption

Yield

ca. 10 linear metres cartridge and 7 linear meters Easi Squeeze (6 mm bead).
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Wood, plaster and brick may be damp but not running wet (NOTE: this will slow down the drying time). Use mechanical abrasion to clean porous surfaces if necessary before application.

Documents