Product Data Sheet Show all documents
Sika® Pinkgrip® But It's White

Sika® Pinkgrip® But It's White

SOLVENT FREE DIRECT BOND ADHESIVE

PINKGRIP® BUT IT’S WHITE is a direct bond solvent free gap filling adhesive. Specifically formulated for the professional user, it can be used to replace mechanical fixings in a wide variety of building and home improvement applications for bonding wood, brick, plaster, plasterboard, polystyrene, Styrofoam, most plastics, metals, and numerous other surfaces.

  • Solvent free formulation.
  • Water clean up - no hazardous solvents.
  • Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications.
  • Will adhere to damp surfaces.
  • Excellent early and ultimate adhesive strength on porous substrates.
  • Excellent gap filling properties to accommodate uneven surfaces.
  • Good “nip off” qualities to prevent messy stringing of the adhesives.
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

  • Bonding dado rails, architrave and skirting.
  • Fixing wall cladding direct to internal wall surfaces or timber battens. 
  • Fixing battens directly onto walls without fastenings.
  • Bonding carpet gripper systems to most floors without the need for nails or tacks. 
  • Bonding stair nosing to concrete or wooden stairs.
  • Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.  

Advantages

  • Solvent free formulation.
  • Water clean up - no hazardous solvents.
  • Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications.
  • Will adhere to damp surfaces.
  • Excellent early and ultimate adhesive strength on porous substrates.
  • Excellent gap filling properties to accommodate uneven surfaces.
  • Good “nip off” qualities to prevent messy stringing of the adhesives.

Packaging

380 ml Cartridge

Colour

White

Product Details

Product Information

Shelf Life

Use within 24 months

Storage Conditions

Store in cool, dry conditions between +5 and +25 °C. Storage outside these parameters will dramatically reduce shelf life. Protect from frost.

Density

1.55 - 1.60 g/cm3
Technical Information

Lap Shear Strength

Days                                Substrate

             Beech: Beech  Beech: Aluminium   Beech: PVC

1                 3.15                  1.06                       0.63          (N/mm2)

7                 3.82                  1.14                       0.8            (N/mm2)

Application

Application Information

Ambient Air Temperature

+4 to +35 °C

Substrate Temperature

+4 to +35 °C

Open Time

Max. 10 mins at 23°C and 50% R.H
Consumption

Consumption

1.5 x 380 ml cartridges per m²
Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean and free from dust, grease and other contaminants. Wood, plaster and brick may be damp but not running wet. Use mechanical abrasion to clean porous surfaces if necessary before application.

Priming is not normally required but Sika® PVA can be used.

Documents