Product Data Sheet Show all documents
Sika® Stixall®

Sika® Stixall®

BUILDING ADHESIVE AND SEALANT. POWER TO BOTH BOND AND SEAL VIRTUALLY EVERYTHING TO ANYTHING IN VIRTUALLY ALL CONDITIONS

STIXALL® is a one part, chemically curing sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves.

  • Incredible initial grab, no slip & gap filling properties.
  • High bonding strength.
  • For interior (adhesive/sealant) and exterior (adhesive) use.
  • Can be applied to wet surfaces.
  • Waterproof & weatherproof.
  • Quick curing.
  • Overpaintable if required (with water based paints - test an inconspicuous area before use).
  • Resistant to temperature extremes -40 °C to +100 °C.
  • Resistant to chemicals (10 % dilute acids/alkalis, most solvents).
  • Excellent primerless adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, acrylic, glass, wood, enamel, painted surfaces etc.
Sika® Stixall®
Seek a Stockist Contact Us
Product Data Sheet Show all documents

Usage

Sealing and bonding in almost every application imaginable. The following are just some examples:
  • As a high quality nail replacement adhesive, even to damp surfaces.
  • Perimeter pointing around doors and windows, especially in mobile structures such as caravans.
  • Bonding mirrors to most common substrates.
  • Jointing cladding panels.
  • Any application requiring high performance, durable sealing and bonding of joints.
  • Applications where resistance to chemical spillage is required.
 

Advantages

  • Incredible initial grab, no slip & gap filling properties.
  • High bonding strength.
  • For interior (adhesive/sealant) and exterior (adhesive) use.
  • Can be applied to wet surfaces.
  • Waterproof & weatherproof.
  • Quick curing.
  • Overpaintable if required (with water based paints - test an inconspicuous area before use).
  • Resistant to temperature extremes -40 °C to +100 °C.
  • Resistant to chemicals (10 % dilute acids/alkalis, most solvents).
  • Excellent primerless adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, acrylic, glass, wood, enamel, painted surfaces etc.

Packaging

290 ml Plastic Cartridge

80 ml Squeezy Tube

Colour

290 ml Plastic Cartridge available in: Black, Brown, Grey, Anthracite and White.

80 ml Squeezy Tube available in: White.

Product Details

Product Information

Product Declaration

EN15651-2:2012 F-INT

Chemical Base

STP

Shelf Life

290 ml Plastic Cartridge = 12 months

80 ml Squeezy Tube = 24 months

Storage Conditions

Store in cool dry conditions between + 5 °C and 25 °C.

Density

ca. 1.5 g/cm3

Consistency

Paste
Technical Information

Shore A Hardness

55 - 60

Tensile Strength

> 1.5 MPa

Lap Shear Strength

Substrates                                Strength 7 days (N/mm2 )

Aluminium:Aluminium                        1.0 - 1.5

PVC:PVC                                                 0.7 - 1.0

Beech wood: Beech wood                  1.5 - 2.0

Shrinkage

<10 % (ISO 10563)

Thermal Resistance

-40 to +100 °C (when fully cured)

Application

Application Information

Sag Flow

<5 mm (ISO7390)

Sagging

Nil

Ambient Air Temperature

+5 to 35 °C

Curing Rate

~1 mm/ 24 hours (+23 °C and 50 % RH)

Skin Time

30 ± 10 minutes (+23 °C and 50 % RH)
Consumption

Consumption

 ca. 10 linear metres as a 6 mm bead (cartridge)

 ca. 3 linear metres as a 6 mm bead (squeezy pack)
Application steps

SUBSTRATE PREPARATION

All surfaces must be clean and dust free. Surfaces may be damp, but have no standing water. Can be used under water for emergency repair.

CLEANING OF TOOLS

Uncured material can be removed by wiping with a dampened cloth with white spirit. Cured material can be carefully removed by mechanical means. Full cure must be allowed before over painting.

 

Documents