Product Data Sheet Show all documents
EVERBUILD® MITRE FAST®

EVERBUILD® MITRE FAST®

Two part instant adhesive system

Mitre Fast Bonding Kit is a two part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc.

  • Bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
  • High viscosity adhesive – Reducing absorption compared to conventional cyanoacrylates on porous surfaces (eg wood)
  • Gap filling – high viscosity adhesive will fill small gaps in joints (up to 0.2 mm)
  Mitre Fast Activator Chemical Base N,N-DIMETHYL-PARA-TOLUIDINE Appearance Colourless Propellant Liquified hydrocarbon Mitre Fast Adhesive Base Monomeric Ethyl cyanoacrylate Solids 100 % active Thermal Condonductivity 0.2 w/k.m               Gap Filling Capability Up to 0.2 mm Refractive Index 1.45 (Cured adhesive) Dielectric Strength 11-13 kV/mm Dielectric Constant 5.2  @ 1MHz (cured adhesive) Softening Point 165 oC Working Temps -20 to +80 oC
Product Data Sheet Show all documents

Usage

  • Multitude of industrial applications: Bonds MDF, wood, chipboard, rubber, plastics, Perspex, uPVC ceramics, aluminium and metals.
  • Ideal for all cornice and profile mitres, trims, picture frames, MDF, skirting and architrave joints, worktop end strips, PVCu trims and much more. It is particularly useful for production lines such as electronics assembly and uPVC window trim bonding.
 

Advantages

  • Bonds most surfaces within 10 seconds, cutting down dramatically mitre assembly bonding times when compared to conventional wood adhesives.
  • High viscosity adhesive – Reducing absorption compared to conventional cyanoacrylates on porous surfaces (eg wood)
  • Gap filling – high viscosity adhesive will fill small gaps in joints (up to 0.2 mm)
  Mitre Fast Activator Chemical Base N,N-DIMETHYL-PARA-TOLUIDINE Appearance Colourless Propellant Liquified hydrocarbon Mitre Fast Adhesive Base Monomeric Ethyl cyanoacrylate Solids 100 % active Thermal Condonductivity 0.2 w/k.m               Gap Filling Capability Up to 0.2 mm Refractive Index 1.45 (Cured adhesive) Dielectric Strength 11-13 kV/mm Dielectric Constant 5.2  @ 1MHz (cured adhesive) Softening Point 165 oC Working Temps -20 to +80 oC

Packaging

Standard Kit - contains 1 x 50 g Adhesive and 1 x 200 ml Activator

Large Kit - contains 1 x 100 g Adhesive and 1 x 400 ml Activator

Separate 50 g Adhesive and 200 ml Activator are available

Colour

Clear

Product Details

Product Information

Shelf Life

12 months from date of manufacture in original unopened containers, depending on temperature of storage. 

Storage Conditions

Store in original unopened containers between 4 and 25 °C. Reseal immediately once used. Protect activator from sources of ignition.

Density

Adhesive  - 1.07 g/cm3

Activator   - 0.79 g/cm3

Viscosity

 Adhesive - 1,100 mPas @ 20 °C.

Activator - 1 mPas @ 20 °C.

Application

Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of +50 %.

Documents