Product Data Sheet Safety Data Sheet Show all documents

EVERBUILD® PVCu Acti-Spray

An aerosol applied activator for safe use on all PVCu and plastics

EVERBUILD® PVCu Acti-Spray is an aerosol applied activator for use with Everbuild® Industrial Superglue GP and HV, setting superglue in 10 seconds. Guaranteed not to stain PVCu. Acti-spray is ideal for use on all PVCu and plastics.

  • Works on all common building surfaces.
  • Suitable for use with all cyanoacrylate superglues.  
  • Will not cause yellowing of uPVC frames and trim.
Seek a Stockist Contact Us
Product Data Sheet Safety Data Sheet Show all documents

Usage

For use on all PVCu and plastics.  

Advantages

  • Works on all common building surfaces.
  • Suitable for use with all cyanoacrylate superglues.  
  • Will not cause yellowing of uPVC frames and trim.

Packaging

200 mL aerosol

Colour

Clear

Product Details

Product Information

Shelf Life

12 months if stored correctly.

Storage Conditions

Store in cool dry conditions away from direct sunlight between +5 and +25 ºC. Storage outside these parameters will significantly reduce shelf life. Ensure good ventilation. 

Application

Application steps

APPLICATION INSTRUCTIONS

Remove cap from canister and apply activator to one of the surfaces to be bonded. Apply cyanoacrylate adhesive to the other surface (e.g. Everbuild® Superglue HV Adhesive). Bring the parts together ensuring the joint is accurate. Joint sets hard in approximately 5 seconds. Always replace cap after use to prevent the pen drying out.

Documents