Product Data Sheet Show all documents
EVERBUILD STICK2® Superglue De-Bonder

EVERBUILD STICK2® Superglue De-Bonder

A Superglue De-bonder for use on cyanoacrylate based superglues

EVERBUILD SUPERGLUE DE-BONDER is a solvent based liquid for de-bonding all types of cyanoacrylate based superglues. De-bonder works on most common surfaces including skin.

  • Works on glass, plastic, rubber, brick, stone, wood and laminates.
  • Fast acting formula
  • Can be used on skin (when applied as directed)
Product Data Sheet Show all documents

Usage

For de-bonding cured cyanoacrylate adhesive from most common surfaces eg. steel, plastic, wood, glass and rubber.  

Advantages

  • Works on glass, plastic, rubber, brick, stone, wood and laminates.
  • Fast acting formula
  • Can be used on skin (when applied as directed)

Packaging

20ml bottle

Product Details

Product Information

Shelf Life

12 months from date of manufacture when stored as directed.

Storage Conditions

Store in cool, dry conditions between +5 and +25˚C.  Ensure good ventilation.  Storage outside these parameters will dramatically reduce shelf life.

Application

Application steps

APPLICATION INSTRUCTIONS

Remove cap from bottle and cut off end of nozzle using a Stanley Knife. Gently squeeze bottle over surface to be de-bonded. Apply 3-4 drops to glue line and leave for 30 seconds. Repeat if necessary.

Wipe away excess with a clean cloth.

When using on hands follow same procedure as above. Wash immediately after with warm soapy water and apply suitable moisturising cream to area. Do not use on broken or sensitive skin.

Documents