Product Data Sheet Show all documents
EVERBUILD STICK2® Superglue GP

EVERBUILD STICK2® Superglue GP

A medium Viscosity Formula for non-porous substrates.

EVERBUILD STICK2® Superglue GP is a medium viscosity flash setting industrial grade adhesive based on advanced cyanoacrylate technology. For use on perfect fit surfaces where fast set is required. Bonds non-porous surfaces. Set time 10 to 15 seconds.                                 

  • Flash setting formulation, bonds to most non porous surfaces in seconds.
  • Fills gaps up to 0.1mm
  • Single component adhesive
  • 100% solvent free
  • Economical in use 
  Solids100% activeFlash Point>85 °CImpact Strength1.8 - 2.0 N/mm2 (steel-steel ASTM 950)Refractive Index1.46 (cured adhesive)Hardness82 (Rockwell cured adhesive)Specific Resistance8 x 1012 Ohm/cm (cured adhesive)Dielectric Const.3.44 @ 1MHz (cured adhesive)Softening Point150 °CWorking Temps.-60 to +80°CSetting times 5-60 seconds (plastic to plastic) 2-20 seconds (rubber to rubber) 10-60 seconds (degreased metal to metal)
Product Data Sheet Show all documents

Usage

EVERBUILD STICK2® Superglue GP is suitable for use on plastics, metals, PVCU and EPDM.

Advantages

  • Flash setting formulation, bonds to most non porous surfaces in seconds.
  • Fills gaps up to 0.1mm
  • Single component adhesive
  • 100% solvent free
  • Economical in use 
  Solids100% activeFlash Point>85 °CImpact Strength1.8 - 2.0 N/mm2 (steel-steel ASTM 950)Refractive Index1.46 (cured adhesive)Hardness82 (Rockwell cured adhesive)Specific Resistance8 x 1012 Ohm/cm (cured adhesive)Dielectric Const.3.44 @ 1MHz (cured adhesive)Softening Point150 °CWorking Temps.-60 to +80°CSetting times 5-60 seconds (plastic to plastic) 2-20 seconds (rubber to rubber) 10-60 seconds (degreased metal to metal)

Packaging

20g and 50g plastic bottle, packed in self merchandising display boxes.

Colour

Transparent

Product Details

Product Information

Chemical Base

Ethyl Cyanoacrylate

Shelf Life

12  months from date of manufacture when stored as directed.

Storage Conditions

Store in cool, dry conditions between +5 and +25˚C.  Ensure good ventilation.  Storage outside these parameters will dramatically reduce shelf life.

Density

1.05 g/cm3

Viscosity

100-120 poise
Technical Information

Tensile Strength

28-32 N/mm2 (steel-steel ASTM D2095)

Shear Strength

15-20 N/mm2 (steel-steel ASTM D1002)

Application

Application steps

SUBSTRATE PREPARATION

The surfaces to be glued should be clean, dry and free from dust, grease and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure working environment has a relative humidity of 50% +.

Documents