Product Data Sheet Show all documents
EVERBUILD SALT AWAY®

EVERBUILD SALT AWAY®

Removes salt and unslightly white efflorescence from bricks, stone and concrete

Efflorescence is commonly caused by soluble salts within building materials, or dissolved salts transferred into building materials by water. At the surface of the building material the water containing these dissolved salts evaporates leaving behind unsightly white deposits. Left untreated efflorescence can cause corrosive damage to many building surfaces.
EVERBUILD SALT AWAY® is a non-hydrochloric acid based treatment for the removal of unsightly efflorescence from most common mineral surfaces including bricks, stone concrete and flag stones. Quick and easy to apply, EVERBUILD SALT AWAY® can be used on walls, driveways, floors and patio areas etc.

  • Biodegradable safe formula.
  • Available in bottles or as a ready to use spray, no need to dilute
  • Water clean up.
  • Can be poured, sprayed or brushed on.
                                                                                                                                                                                                                          Odour Acrid
Product Data Sheet Show all documents

Usage

  • Removing efflorescence from most common mineral surface including brick, stone, render, pathways, patio areas etc.
 

Advantages

  • Biodegradable safe formula.
  • Available in bottles or as a ready to use spray, no need to dilute
  • Water clean up.
  • Can be poured, sprayed or brushed on.
                                                                                                                                                                                                                          Odour Acrid

Packaging

1Ltr spray bottle & 5Ltr jerry can

Colour

Pale green

Product Details

Product Information

Shelf Life

24 months form date of manufacture.

Storage Conditions

Store in original containers in cool (5 - 25°C) dry conditions. Do not allow to freeze.

Density

ca. 1.08g/cm³ @ 20°C

pH-Value

1.0-3.0

Application

Consumption

Yield

Approx. 8-10m² per litre depending on porosity of substrate.

 
Application steps

SUBSTRATE PREPARATION

Remove any loose surface dirt or debris with a stiff brush.

APPLICATION

Always test a small inconspicuous area prior to full application.
Dampen the surface to be treated with water. Spray or pour EVERBUILD SALT AWAY® onto the affected area ensuring complete coverage. Take care not to overspray EVERBUILD SALT AWAY® onto surrounding areas particularly lawns, plant beds or metal surfaces. Leave EVERBUILD SALT AWAY® for 5-10 minutes depending on levels of efflorescence. Wash down area with clean fresh water. Repeat application may be necessary for badly affected areas.
In order to help prevent further efflorescence re-appearing, walls can be treated using Everbuild 402 Waterseal or 408 Superseal, paths & patios with Block Guard or Path & Patio Seal.

Documents