Product Data Sheet Show all documents
Sika® Stone Protector

Sika® Stone Protector

Water-based protector for natural stone

Sika® Stone Protector is a water-based protector suitable for all forms of natural stone. Can be used internally or externally to resist stains without changing the aesthetic look of the surface.

  • Protects natural stone and mineral surfaces.
  • Provides long lasting protection against water penetration.
  • Protects from accidental spillages such as tea, coffee, wine and other foodstuffs.
  • Ready to use.
  • One coat application.
  • Dries in under 3 hours.
Product Data Sheet Show all documents

Usage

  • Suitable for use on natural stone including Indian sandstone, granite, slate and limestone.
  • Internal and external use.
  • Ideal for use on paths, patios and block paving.
 

Advantages

  • Protects natural stone and mineral surfaces.
  • Provides long lasting protection against water penetration.
  • Protects from accidental spillages such as tea, coffee, wine and other foodstuffs.
  • Ready to use.
  • One coat application.
  • Dries in under 3 hours.

Packaging

5L jerry

Colour

Milky upon application but dries to an invisible finish

Product Details

Product Information

Shelf Life

12 months from date of manufacture in unopened containers.

Storage Conditions

Store upright in original, tightly sealed containers and in a dry cool well-ventilated area. Protect from sunlight and frost.

Density

ca. 0.98 g/cm3

pH-Value

ca. 8

Application

Application Information

Ambient Air Temperature

+5 °C to +35 °C
Consumption

Consumption

4-8 m2 per litre depending on porosity of substrate
Application steps

APPLICATION

Shake well before use. Apply in dry weather using a good quality long pile roller or suitable brush. Apply in even coats ensuring any surface irregularities are covered (avoid pooling/ponding of product). Do not apply in temperatures below 5 °C or if rain is imminent (within 6 hours). Drying time will vary depending on conditions. As a guide, drying time will be approx. 1-3 hours at 20 °C. Drying time will be extended if applied below 10 °C. Ensure the surface is completely dry before trafficking. Normally only one coat is required however, for very porous surfaces such as Indian sandstone, a second coat may be required. The second coat must be applied typically within 30 minutes (before the first coat has dried). A consumption/appearance trial is recommended before use.

CLEANING OF TOOLS

Clean all equipment with clean water.

Documents