EVERBUILD® Quick Drying Clear Varnish

24 months from date of manufacture when stored as directed.

Store in cool dry conditions between + 5 and +25°C.  Storage outside these conditions will dramatically reduce shelf life. Protect from frost.

1.0 - 1.1 g/cm³

7.5 - 9

Volatile Organic Compounds contribute to atmospheric

pollution. EU limit value for this product (cat A/e):

130g/L (2010). This product contains max 60g/L VOC.

Do not use in temperatures below 10°C.

Up to 16m²/litre depending on porosity of wood and number of coats applied

Stir product well before use and intermittently during application.

Ensure wood is clean, dry and free from dirt or dust by wiping with a lint free cloth dampened with white spirit, allow to dry before applying EVERBUILD® Quick Drying Clear Varnish.

On varnished wood, remove any unsound varnish and sand the surface with medium grade sandpaper to a uniformed appearance and then clean with white spirit. Allow to dry thoroughly before applying EVERBUILD® Quick Drying Clear Varnish. On bare wood, sand the surface with fine sandpaper. Always remove excess dust with a cloth before applying varnish.

Brush apply EVERBUILD® Quick Drying Clear Varnish, following the direction of the wood grain. Always apply the varnish to a wet edge, working systematically across the surface keeping the wet edge moving together as much as possible. The film is touch dry in 30 minutes. Approximately 2-3 coats will be required for full coverage. Allow 1 hour between each coat. Lightly sand the surface before applying the final coat.

Note: on application, the varnish will appear slightly white; this quickly turns completely clear as the drying process starts.

Clean brushes thoroughly with water after use; a little washing up liquid will assist brush cleaning.

If water is accidently spilt on the surface within 2-3 days of application, remove by wiping gently (do not rub) with a soft cloth.